10. Live Broadcasting - Start your own Internet radio

Live Broadcasting in Mixxx allow you to stream your mix over the Internet to listeners around the world.

Siehe auch

The Using Microphones chapter has detailed instructions for including input from microphones in your broadcasted mixes.

10.1. Streaming-Server

Remote streaming server

Mixxx allows you to feed your audio stream directly to Shoutcast and Icecast streaming servers. Depending on the number of listeners, streaming audio requires a significant amount of bandwidth. Streaming servers provide the required bandwidth and broadcast the stream to your listeners. A popular free streaming service is Caster.fm. A review of several free and paid stream hosts is available at broadcastingworld.net.

Mixxx as client-side streaming source broadcasting to an
remote streaming server

Mixxx as client-side streaming source broadcasting to an remote streaming server

Local streaming server

For experienced users, it may be interesting to set up your own local streaming server. This turns your personal computer into a radio station and listeners connect directly to your server. Mixxx as a streaming source does not need to run on the same computer as your streaming server. However, professional stations often run the streaming source on the same computer as the streaming server for stability and reliability reasons. Keep in mind that if want to stream audio to a significant number of listeners, you’ll need enough bandwidth. Read the Shoutcast documentation or Icecast documentation for server setup instructions.

Mixxx as client-side streaming source broadcasting to an
remote streaming server

Mixxx as client-side streaming source broadcasting to an local streaming server

10.2. Konfigurieren von Mixxx

Start by supplying Mixxx with all information needed to establish a connection to the streaming server:

10.3. Live Broadcasting Preferences

Mixxx preferences - Setting up live broadcasting

Mixxx preferences - Setting up live broadcasting

Serververbindung

  • Type: Select the type of streaming server you want to connect with. Shoutcast 1, Icecast 1, and Icecast 2 servers are supported.

    Mixxx works with Shoutcast 2 using the Shoutcast 1 protocol if you provide a stream name in Preferences ‣ Live Broadcasting ‣ Stream Settings. If you don’t provide a stream name, Shoutcast 2 rejects the connection (where Shoutcast 1 would accept this case).

  • Host: You can enter the host as either a host name or an IP address.

  • Login: As provided by your streaming server provider. Without this, you will not connect successfully to the server. The default login for Icecast is source while the default login for Shoutcast is admin.

  • Mount: A mount point is a unique name identifying a particular stream. For Shoutcast it is not necessary to specify a mount point. The setting must not be blank if you are using Icecast. Try the default /mount or /live. If you haven’t been given a specific mount point you can usually make one up. It always begins with a / (slash) followed by a text without any special characters in it.

  • Port: So wie von Ihrem Streaming Server-Anbieter angegeben. Die meisten Server verwenden den Standard-Port 8000.

  • ** Passwort**: So wie von Ihrem Streaming Server-Anbieter angegeben, sofern Sie nicht Ihren eigenen Radio-Server ausführen. Es ist erforderlich, um die Verbindung zum Server herzustellen und die Übertragung zu starten.

Warnung

Do not enter a URL as the host! http://example.com:8000 does not work. Use example.com in the Host field and 8000 in the Port field instead.

Stream-Einstellungen

  • Öffentlicher Stream: Wenn aktiviert, wird diese Option Ihren Radiosender den Shoutcast/Icecast Verzeichnissen hinzugefügen.

  • Enable UTF-8 metadata: If enabled, this option fixes broken accented and foreign language symbols in metadata, assuming the streaming provider has configured the server to support UTF-8 metadata.

  • Dynamically update Ogg Vorbis metadata: Due to flaws in some streaming clients, updating Ogg Vorbis metadata dynamically can cause listener glitches and disconnections. Check this box to update the metadata anyway. Some players that listeners can use have bugs that can cause audio glitches or disconnections when the Ogg Vorbis metadata is updated dynamically. If this is not a problem, you can enable this checkbox.

  • Stream-Name: Also, wie lautet der Name Ihrer Show?

  • Website: The website you would like your listeners to visit.

  • Beschreibung: Geben Sie Ihre DJ-Namen und einer kurzen Slogan an.

  • Genre: Listen Sie die wichtigsten Genres, die Sie spielen. Dies zieht Suchtreffer in Stream-Verzeichnisse auf sich. Genre darf nicht leer sein.

Kodierung

  • Bitrate: Selecting a bitrate of 128 or 160 kbps is common and provides sufficient quality to your listeners. Higher bitrates will use a larger chunk in your Internet connection bandwidth to stream and for your listeners to receive the stream.

  • Format: Mixxx supports streaming to Icecast servers either in MP3 or Ogg Vorbis format, streaming to Shoutcast servers is supported in MP3 format.

Shoutcast-Metadatenformat

This allows to set custom metatdata formats for the Shoutcast title field. Previously only artist - title was allowed. For example if you were broadcasting as part of a station, you could add the station’s name or the presenter’s name in the title: MyStation | $artist - $title. Or if you were doing a live mix with several artists, you could have: Live mix by MyName - currently playing: $artist. Or even if you wanted a very unusual format: Hey, I like $artist, here is $title by $artist.

Die Änderungen haben keinen Einfluss für die Kombination von OGG/Icecast2.

Benutzerdefinierte Metadaten

Standardmäßig sendet Mixxx Künstler- und Titel-Informationen der Dateien, die Sie für Ihre Zuhörer spielen. Sie können diese Funktion deaktivieren, und Ihre eigenen benutzerdefinierten Metadaten verwenden.

  • Benutzerdefinierte Metadaten aktivieren: Benutzerdefinierte Metadaten ein- und ausschalten.

  • Artist: Insert your custom artist metadata here, your DJ name for example.

  • Titel: Fügen Sie hier Ihre benutzerdefinierten Titel-Metadaten ein.

Bemerkung

Aufgrund von Lizenzierungsbeschränkungen ist MP3-Streaming nicht standardmäßig aktiviert. Informationen zum Aktivieren des MP3-Streaming finden Sie im Kapitel MP3-Streaming-Unterstützung aktivieren.

10.3.1. Icecast vs. Shoutcast

Both essentially serve the same purpose. An Icecast server can stream either MP3 or Ogg Vorbis. However, although Ogg is more efficient and effective (you get higher-fidelity sound than MP3 at lower data rates) not all players can play Ogg streams. As a result MP3 is probably a safe choice unless you know your listeners can hear an Ogg stream successfully.

10.3.2. Broadcast-Verzeichnisse

Generally your streaming server host adds your radio station to the Shoutcast/Icecast directory, if you enable the Public Stream option in Preferences ‣ Live Broadcasting ‣ Stream Settings.

Often streaming hosts will run their own directories. Check your host’s FAQ to find out. If you want to promote your streaming radio station even more, register at services like streamfinder.com. An overview of different internet radio directories is available at shoutcheap.com

10.4. Fehlerbehebung

  • Haben Sie Probleme bei der Verbindung zum Streaming-Server, überprüfen Sie die Einstellungen in den Live Broadcasting Preferences.

  • Sie benötigen möglicherweise die LAME Bibliotheken, um im MP3-Format zu senden. Siehe MP3-Streaming-Unterstützung aktivieren.

  • Sie haben möglicherweise das Ogg Vorbis Format gewählt, welches von Shoutcast-Servern nicht unterstützt wird.

  • Sie müssen möglicherweise Ihre Firewalleinstellungen überprüfen. Icecast und Shoutcast verwenden beide zwei Ports. Wenn Sie an einem Port (z.B. Port 8000) senden, dann musst du auch den nächsten Port (Port 8001) freigeben.

  • Möglicherweise müssen Sie eine Portweiterleitung konfigurieren, wenn Sie hinter einem Router sind oder Ihr Router wird Anfragen zu Ihrem Streaming-Port (z. B. Port 8000) blockieren

10.5. MP3-Streaming-Unterstützung aktivieren

Due to licensing restrictions, MP3 streaming is not enabled by default. In order to enable MP3 streaming you must install the LAME MP3 codec yourself. The following section explains how you can do that.

Hinweis

Wenn Sie die MP3-Streaming-Unterstützung aktiviert haben, werden Sie auch Ihre Mixe im MP3-Format aufnehmen können. Gehen Sie zum Kapitel Recording Your Mix für weitere Informationen.

10.5.1. MP3-Streaming-Unterstützung unter Windows aktivieren

Gehen folgendermaßen Sie vor, um MP3-Streaming unter Windows zu aktivieren:

  1. Laden Sie LAME 3.98.4 binaries von http://www.rarewares.org/mp3-lame-libraries.php.

    Hinweis

    The download page includes 32-bit and 64-bit versions. Make sure the version you download matches the version of Mixxx that you use, not the version of Windows. If you are on 64bit Windows but are using 32bit Mixxx, you need the 32bit (“x86”) version of the LAME binaries.

  2. Unpack the downloaded archive. You need a utility for manipulating archives like the free 7zip.

  3. Kopieren Sie libmp3lame.dll zu dem Speicherort and dem Sie Mixxx installiert haben, wahrscheinlich C:\Program Files\Mixxx\.

  4. Only if you are running Mixxx 1.11 or earlier, you must also rename libmp3lame.dll to lame_enc.dll in the folder where you have installed Mixxx. Select Help ‣ About to find out your version of Mixxx.

  5. Mixxx neu starten

10.5.1.1. Windows Fehlerbehebung

  • Überprüfen Sie, dass die LAME-Version welche Sie verwenden (“x86” = 32-bit vs. “x64” = 64-bit) der Version von Mixxx entspricht, die Sie verwenden.

  • Wenn Sie mit Mixxx 1.11 oder eher verwenden, haben Sie die libmp3lame.dll nach lame_enc.dll umbenannt?

  • Stellen Sie sicher, das die richtige LAME *.dll Datei sich im gleichen Ordner befindet, der die Installation von Mixxx enthält.

Warnung

Some websites like Audacity provide lame binaries too. Do not use these versions or Mixxx will show an error when activating live broadcasting and your stream will fail.

10.5.2. Activate MP3 streaming support on macOS

10.5.2.1. Methode A: Download

To activate MP3 streaming on macOS, follow these steps:

  1. Download LAME 3.98.4 Intel (macOS 10.8+ 64-bit)

  2. Doppelklicken Sie auf die heruntergeladene Zip-Datei um die Datei zu entpacken und Sie erhalten einen Installer-Paketdatei

  3. Doppelklicken Sie auf die Installer-Paket-Datei und folgen Sie den Schritt für Schritt Anweisungen des Installationsprogramms

  4. Mixxx neu starten

10.5.2.2. Methode B: Paketmanager

Another easy way to activate MP3 streaming is to use Homebrew or MacPorts, which are package managers like apt on Debian/Ubuntu Linux. They provide a convenient way to install many Open Source packages. Once Homebrew or Macports is installed, adding MP3 support to Mixxx is rather simple.

Homebrew:

  1. Öffnen Sie ein Terminal und geben Sie die folgenden Befehle ein:

    brew install lame
    
  2. Mixxx neu starten

Macports:

  1. Öffnen Sie ein Terminal und geben Sie die folgenden Befehle ein:

    sudo port install lame
    
  2. Mixxx neu starten

10.5.3. MP3-Streaming-Unterstützung unter Linux aktivieren

Unter Ubuntu und GNU/Linux-basierten Betriebssystemen können MP3 Streams durch Installation des Pakets file:‘libmp3lame‘ aktiviert werden. Abhängig von Ihrer Linux-Distribution ist das Paket möglicherweise etwas anders benannt wie beispielsweise lame.

  1. Öffnen Sie ein Terminal und geben Sie die folgenden Befehle ein:

    sudo apt-get install libmp3lame0
    
  2. Mixxx neu starten