Hercules DJControl Inpulse 200
Novo v verziji 2.3.0.
Compatibility
This controller is a class compliant USB MIDI and audio device, so it can be used without any special drivers on GNU/Linux, Mac OS X, and Windows. However, if you wish to use the ASIO sound API under Windows, please install the latest driver package available from the Support page.
Sound Card Setup
This controller has built-in 4 channel output sound card, with MASTER output (RCA) and HEADPHONE output (3.5mm jack).
Open Preferences > Sound Hardware
Select the Output tab
From the Main drop-down menu, select the audio interface, then Channels 1 - 2
From the Headphones drop-down menu, select the audio interface, then Channels 3 - 4
Click Apply to save the changes.
Poglej Tudi
The example setups section provides more details about the audio configuration in Mixxx.
Opomba
The MASTER and HEADPHONE knobs, as well as the MASTER button are hardware controls and interact directly with the integrated sound card’s output. Although they also send MIDI messages, they have NOT been mapped in Mixxx, so do not expect an on-screen reaction when using them. This was done to prevent the knobs to adjust both the gain on the controller’s sound card and in Mixxx.
Mapping description
All controls not mentioned behave as labeled.
Decks
Control |
Function |
|---|---|
SYNC button |
Toggle Sync Lock. |
SHIFT + SYNC button |
Set deck as Sync leader. |
CUE button |
Specifies, plays or recalls temporary cue point. |
SHIFT + CUE button |
Return to the beginning of the track. |
Play button |
Play/Pause the current track. |
SHIFT + Play button |
Cue Stutter. |
VINYL button |
Toggle scratch mode (default: on) |
Loop IN button |
Enable Beatloop. |
SHIFT + Loop IN button |
Halve the current loop size. |
Loop OUT button |
Disable Beatloop. |
SHIFT + Loop OUT button |
Double the current loop size. |
Beat Align LED |
Track end warning (make sure BEATMATCH GUIDE is on for this to work) |
Browser
Control |
Function |
|---|---|
BROWSER encoder (turn) |
Move up/down list. |
BROWSER encoder (press) |
Switch focus between list and file view. |
SHIFT + Encoder (press) |
Maximize/Minimize library view. |
ASSISTANT button |
Toggle AutoDJ (be sure a playlist was created for AutoDJ before activating this function). |
Performance Pads
Hot Cue Mode
Control |
Function |
|---|---|
Pad 1 - 4 |
Set and trigger hotcue 1 - 4 |
SHIFT + Pad 1 - 4 |
Delete hotcue 1 - 4. |
Roll Mode
Control |
Function |
|---|---|
Pad 1 |
Set Beatloop of 1 beat size. |
Pad 2 |
Set Beatloop of 2 beat size. |
Pad 3 |
Set Beatloop of 4 beat size. |
Pad 4 |
Set Beatloop of 8 beat size. |
FX Mode
When using Firmware v1.68 and earlier, each FX pad will send multiple and different Note and CC messages. As these could not all be used properly with Mixxx current effect framework, a simplified configuration was assigned using the pad in SHIFT mode for convenience.
Control |
Function |
|---|---|
SHIFT + Pad 1 - 3 |
Toggle Effect 1 - 3. |
SHIFT + Pad 4 (deck A) |
Toggle Effect Rack 1. |
SHIFT + Pad 4 (deck B) |
Toggle Effect Rack 2. |
However, after applying Firmware v1.72, each FX pad now sends a simple Note On/Note Off (as is the case in every other Pad mode). This makes it easier to use the pads to control effect and the latest mapping take advantage of this possibility by removing the use of the SHIFT button.
Control |
Function |
|---|---|
Pad 1 - 3 |
Toggle Effect 1 - 3. |
Pad 4 (deck A) |
Toggle Effect Rack 1. |
Pad 4 (deck B) |
Toggle Effect Rack 2. |
Poglej Tudi
Read the update guide for more details about updating the firmware.
Sampler Mode
Control |
Function |
|---|---|
Pad 1 - 4 (deck A) |
Trigger Sampler 1 - 4. |
Pad 1 - 4 (deck B) |
Trigger Sampler 5 - 8. |
Unmapped Controls
The following controls are not mapped because they are controlled by the hardware.
MASTER knob
HEADPHONE knob
MASTER buttons
BEATMATCH guide