Hercules DJControl MIX

• Manufacturer’s product page

• Manufacturer’s support and downloads page

• Forum thread

Novo v verziji 2.4.

Compatibility

This controller is a class compliant USB MIDI, so it can be used without any special drivers on GNU/Linux, Mac OS X, and Windows.

Opomba

In order to use this mapping, the DJControl MIX must be physically connected to the computer through USB. It was not conceived to use the controller connected via Bluetooth.

Sound Card Setup

This device does not have a built in audio interface.

Poglej Tudi

Please refer to example setups section for more details about the audio configuration in Mixxx.

Mapping description

Decks

Control	Function
SYNC button	Toggle Sync Lock.
SHIFT + SYNC button	Set deck as Sync leader.
CUE button	Specifies, plays or recalls temporary cue point.
SHIFT + CUE button	Return to the beginning of the track.
Play button	Play/Pause the current track.
SHIFT + Play button	Cue Stutter.
VINYL button	Toggle scratch mode (default: on)
TEMPO	Controls pitch/tempo ratio

Mixer

Control	Function
Crossfader	Fades between deck 1 and 2
MASTER	Controls the main output volume
HEADPHONE knob	Controls the headphone output volume
Headphone buttons	Toggles PFL/Cue (headphones) for specific deck
SHIFT + CUE MASTER	Toggles between headphone’s audio source (Cue / Main)
SHIFT + SPLIT ON/OFF	Toggles split cue (headphones)
Volume	Controls deck volume
Filter/Bass knob	Controls deck’s filter/ equalizer low frequencies
Filter/Bass button	Toggles knob control between Filter/Bass

Performance Pads

Hot Cue Mode

Control	Function
Pad 1 - 4	Set and trigger hotcue 1 - 4
SHIFT + Pad 1 - 4	Delete hotcue 1 - 4.

Loop Mode

Control	Function
Pad 1	Activate beatloop of 1/2 beat size.
Pad 2	Activate beatloop of 1 beat size.
Pad 3	Activate beatloop of 2 beats size.
Pad 4	Activate beatloop of 4 beats size.

FX Mode

Control	Function
Pad 1 - 3	Toggle Effect 1 - 3.
SHIFT + :hwlabel: Pad 1 - 3	Select Next available Effect
Pad 4 (Deck A)	Toggle Effect Unit 1.
Pad 4 (Deck B)	Toggle Effect Unit 2.

Opomba

The effects can be applied in two ways:

• Permanent = Press pad to turn effect on, press again to turn off.

• Momentary = Press and Hold. The effect will be on until the pad is released.

Sampler Mode

Control	Function
Pad 1 - 4 (Deck A)	Trigger Sampler 1 - 4.
Pad 1 - 4 (Deck B)	Trigger Sampler 5 - 8.