Numark DJ2GO2 Touch
The Numark DJ2GO2 Touch is a USB MIDI controller with an integrated audio interface. It is the successor to the DJ2GO2, and features touch capable wheels.
在 2.3.1 版本加入.
Audio Setup
The mapping relies on the following channel assignments:
Output Channels |
Assigned to |
---|---|
1-2 |
Master |
3-4 |
Headphones |
Controller Mapping
Decks
No. |
Control |
Function |
---|---|---|
2 |
HEADPHONES |
Routes deck to headphones output |
6 |
LOAD |
Loads a track into the deck. |
7 |
LEVEL |
Hi / low pass filter effect. |
9 |
PAD MODE |
Switches between modes of operation for pad buttons on both decks. |
10 |
Jog Wheel (top surface) |
Perform scratch operation. |
10 |
Jog Wheel (outer edge) |
Rotate to lower/raise playback speed and pitch. |
11 |
PLAY/PAUSE |
Plays or pause the song. |
12 |
Pads |
4 buttons which can be used to control various features. |
13 |
CUE |
Specifies, plays or recalls temporary cue point. |
14 |
SYNC |
Match tempo and phase of other deck. |
15 |
Tempo slider |
Adjust song playback speed. |
Pads
The pad mode is changed using the PAD MODE button.
Pad Mode |
Function |
---|---|
CUES |
Set cue points, and trigger them by clicking. Clear cue points by clicking while holding the PAD MODE button. |
AUTO |
Enable / disable beat loops, with pads 1, 2, 3, and 4 creating 1, 4, 8, and 16 bar loops respectively. |
MANUAL |
Set a custom loop: pad 1 sets the loop in point, pad 2 sets the loop out point, pad 3 enables / disables the loop, and pad 4 stops the loop and returns to the beginning. |
SAMPLER |
Load / trigger sample tracks. |
Mixer / Library
No. |
Control |
Function |
---|---|---|
3 |
CUE LEVEL |
Adjusts the cue output level. |
4 |
MASTER LEVEL |
Adjusts the master output level. |
5 |
Browse encoder |
Scroll in the track list. Preview tracks when clicking on a track in a tracklist, scrolling the encoder allows seeking the previewed track. Clicking when a track is being previewed will stop the preview, allowing you to scroll the tracklist again. |
8 |
Crossfader |
Fades between left and right deck. |
Inputs / outputs
No. |
IO |
Function |
---|---|---|
1 |
USB |
Micro USB slot for data / power connection to the Mixxx host device. |
16 |
Main (3.5mm) |
Master audio output for the onboard interface. |
17 |
Headphones (3.5mm) |
Headphones audio output for the onboard interface. |