Pioneer DDJ-SX

The Pioneer DDJ-SX is a 4 deck all-in-one controller that provides intuitive control of all of Mixxx’s features. The DDJ-SX mapping reportedly works with the DDJ-SX2, but it does not use the new features of the DDJ-SX2 hardware.

Novetat de la versió 2.1.

User Options

To change the mapping’s user options, you have to open the script file (.js). At the top of the file under **USER OPTIONS* the following settings can be made:

  • PioneerDDJSX.jogwheelSensivity: Sets the jogwheel sensitivity. 1 = default, 2 is twice as sensitive, 0.5 is half as sensitive.

  • PioneerDDJSX.jogwheelShiftMultiplier: Sets how much more sensitive the jogwheels get when holding SHIFT. Set it to 1 to disable jogwheel sensitivity increase when holding SHIFT.

  • PioneerDDJSX.twinkleVumeterAutodjOn: If true, level-meter twinkles if AutoDJ is enabled.

  • PioneerDDJSX.autoDJAddTop: If true, the selected track will be added to AutoDJ queue-top on pressing ROTARY SELECTOR, else the selected track will be added to AutoDJ queue-bottom.

  • PioneerDDJSX.autoDJTickInterval: Sets the duration of sleeping between AutoDJ actions if AutoDJ is enabled [ms].

  • PioneerDDJSX.autoDJMaxBpmAdjustment: Sets the maximum adjustment of BPM allowed for beats to sync if AutoDJ is enabled.

  • PioneerDDJSX.autoDJShuffleAfterSkip: If true, AutoDJ queue is being shuffled after skipping a track.

  • PioneerDDJSX.jumpPreviewEnabled: If true, by releasing the Rotary Selector, track in preview player jumps forward to jumpPreviewPosition.

  • PioneerDDJSX.jumpPreviewPosition: Sets the preview player absolute position, being set at releasing Rotary Selector and if jumpPreviewEnabled enabled.

  • PioneerDDJSX.samplerCueGotoAndPlay: If true, pad press in SAMPLER PAD MODE repeatedly causes sampler to play loaded track from cue-point, else it causes to play loaded track from the beginning.

  • PioneerDDJSX.autoPFL: If true, PFL / Cue (headphone) is being activated by loading a track into certain deck.

General Functions

Group

Figure

Control

Description

5 - BROWSER

2, 3, 4, 5

LOAD

Loads the selected track into the specific deck

5 - BROWSER

2

SHIFT + LOAD

AutoDJ - Toggle BPM sync

5 - BROWSER

3

SHIFT + LOAD

AutoDJ - Toggle Key sync

5 - BROWSER

1

Rotary Selector

Move UP or DOWN the specified number of locations in Library (MoveVertical function)

5 - BROWSER

1

Rotary Selector (press)

Equivalent to double clicking the currently selected item in Library (GoToItem function)

5 - BROWSER

1

SHIFT + Rotary Selector

Move LEFT or RIGHT the specified number of locations in Library (MoveHorizontal function)

5 - BROWSER

1

SHIFT + Rotary Selector (press)

Add track from Library to AutoDJ queue at top/bottom (see user options: default = at bottom)

5 - BROWSER

6

BACK

Currently focused pane changes in Library - previously focused pane will be focused (MoveFocusBackward function)

5 - BROWSER

6

SHIFT BACK

Maximize view of Library

5 - BROWSER

7

LOAD PREPARE

Load selected track into PreviewDeck, jump to position (see user options) and play, else stop already playing track

3 - MIXER

1

Crossfader

Controls Mixxx crossfader, fades between deck 1, 3 and 2, 4

3 - MIXER

2

Channel fader

Controls deck volume

3 - MIXER

2

SHIFT Channel fader

Fader start (starts playing deck when rising deck volume)

3 - MIXER

3

TRIM

Controls deck gain

3 - MIXER

4

EQ HIGH

Controls deck’s equalizer/filter high frequencies

3 - MIXER

5

EQ MID

Controls deck’s equalizer/filter mid frequencies

3 - MIXER

6

EQ LOW

Controls deck’s equalizer/filter low frequencies

3 - MIXER

7

CUE

Toggles PFL/Cue (headphones) for specific deck

3 - MIXER

7

SHIFT CUE

BPM Tab function for specific deck

3 - MIXER

8

MASTER LEVEL

Controls the master output volume

3 - MIXER

9

MASTER CUE

Toggles master cue

3 - MIXER

9

SHIFT MASTER CUE

Toggles split cue (headphones)

3 - MIXER

10

Crossfader Assign

Crossfader assignment - deck to crossfader (left (A), right (B) or center (THRU))

3 - MIXER

13

HEADPHONES MIX

Controls headphone’s audio source (cue, master)

3 - MIXER

14

SAMPLER VOLUME

Controls volume of all available Sampler decks

3 - MIXER

15

BOOTH MONITOR LEVEL

Controls the booth output volume

4 - FRONT PANEL

1

Crossfader curve

Controls Mixxx crossfader curve

4 - FRONT PANEL

2

INPUT SELECT

Controls deck source (PC, MIC, CD, PHONO, LINE)

1 - DECK

25

PANEL SELECT

Show/hide Sampler decks / Effect rack

Nota

The MASTER LEVEL, MASTER CUE, HEADPHONE MIX, BOOTH MONITOR LEVEL and INPUT SELECT controls directly affect the controller’s sound card, so adjusting these will not change anything on screen in Mixxx.

Deck Functions

The controls listed here are documented in Section 1 («Deck») of the owner’s manual.

Figure

Control

Description

1

PLAY/PAUSE

Toggles play/pause (hold pressed while playing: starts brake effect -> release: pause track, press while stopped: starts playback)

1

SHIFT + PLAY/PAUSE

Toggles play stutter

2

CUE

Toggles default cue (sets cue point/ goes to cue point)

2

SHIFT + CUE

Jump to the beginning of the track and stop

3

Jog Wheel (platter)

Vinyl-Mode enabled: performs scratching when pressed and rotated, Vinyl-Mode disabled: performs pitch bend

3

SHIFT + Jog Wheel (platter)

Vinyl-Mode enabled: performs scratching considering user-options multiplier when touched and rotated, Vinyl-Mode disabled: performs pitch bend considering user-options multiplier

3

Jog Wheel (side)

Performs pitch bend when rotated

3

SHIFT + Jog Wheel (side)

Performs pitch bend when rotated considering user-options multiplier

4

TEMPO

Controls pitch/tempo ratio

5

KEYLOCK

Toggles keylock

5

SHIFT + KEYLOCK

Changes TEMPO slider range: Doubles the rateRange, starting from the value set up in the Mixxx settings, until 100% is reached. On the next press rateRange jumps back to its original value.

5

KEYLOCK (long press)

Toggles pitch/tempo reset

6

NEEDLE SEARCH

Jumps to equivalent absolute position in track if track is stopped.

6

SHIFT + NEEDLE SEARCH

Jumps to equivalent absolute position in track while track is playing.

7

DECK 1

Switches left deck to DECK 1 control and illumination

8

DECK 2

Switches right deck to DECK 2 control and illumination

9

DECK 3

Switches left deck to DECK 3 control and illumination

10

DECK 4

Switches right deck to DECK 4 control and illumination

11

DUAL DECK

Toggles left deck to dual deck control and illumination (DECK 1 and 3)

12

DUAL DECK

Toggles right deck to dual deck control and illumination (DECK 2 and 4)

13

SYNC

Toggles deck sync

13

SHIFT + SYNC

Toggles quantize function

14

AUTO LOOP

Set and enable beat loop

14

SHIFT AUTO LOOP

Activates / Deactivates current loop

15

LOOP 1/2X

Halves active loop

15

SHIFT LOOP 1/2X

Moves active loop one beat backward (left)

16

LOOP 2X

Doubles active loop

15

SHIFT LOOP 2X

Moves active loop one beat forward (right)

17

LOOP IN

Toggles loop in

17

SHIFT LOOP IN

Activates current loop, jumps to its loop in point and stops playback.

18

LOOP OUT

Toggles loop out

18

SHIFT LOOP OUT

Toggles reloop / exit loop

19

VINYL

Toggles vinyl (scratch) mode

20

CENSOR

Toggles reverse roll play

20

SHIFT CENSOR

Toggles reverse play

21

SLIP

Toggles slip mode

22

GRID ADJUST

Hold and touch/rotate Jog dial to adjust beats faster/slower

22

SHIFT GRID ADJUST

Set/translate beat grid to current track position (adjust position with Jog dial)

23

GRID SLIDE

Hold and touch/rotate Jog dial to set/translate beat grid earlier/later

24

SHIFT

Switches to shifted controls, no direct function

Performance Pads

The performance pads support multiple different modes. The controls listed here are documented in Section 6 («Performance Pads») of the owner’s manual.

Figure

Control

Description

9

HOT CUE mode

Switches pad control and illumination to HOT CUE mode

10

ROLL mode

Switches pad control and illumination to BEATLOOP ROLL mode

10

SHIFT + ROLL mode

Switches pad control and illumination to GROUP2 (BEATLOOP) mode

11

SLICER mode

Switches pad control and illumination to SLICER mode, in SLICER mode switches between continuous slice mode and loop slice mode

12

SAMPLER mode

Switches pad control and illumination to SAMPLER mode

12

SAMPLER mode (long press)

Toggles sampler pad velocity mode (velocity ~ volume)

HOT CUE Mode

Figure

Control

Description

1

PAD 1

Set/activate Hot cue 1

1

SHIFT + PAD 1

Clear Hot cue 1

2

PAD 2

Set/activate Hot cue 2

2

SHIFT + PAD 2

Clear Hot cue 2

3

PAD 3

Set/activate Hot cue 3

3

SHIFT + PAD 3

Clear Hot cue 3

4

PAD 4

Set/activate Hot cue 4

4

SHIFT + PAD 4

Clear Hot cue 4

5

PAD 5

Set/activate Hot cue 5

5

SHIFT + PAD 5

Clear Hot cue 5

6

PAD 6

Set/activate Hot cue 6

6

SHIFT + PAD 6

Clear Hot cue 6

7

PAD 7

Set/activate Hot cue 7

7

SHIFT + PAD 7

Clear Hot cue 7

8

PAD 8

Set/activate Hot cue 8

8

SHIFT + PAD 8

Clear Hot cue 8

13

PARAMETER LEFT

Jump beatjump_size beats backward

13

SHIFT + PARAMETER LEFT

Increase beatjump_size

14

PARAMETER RIGHT

Jump beatjump_size beats forward

14

SHIFT + PARAMETER RIGHT

Decreate beatjump_size

BEATLOOP ROLL Mode

By using the PARAMETER LEFT and PARAMETER RIGHT buttons in BEATLOOP ROLL (default parameter set: 2), you can change the pad-assigned loop size. The following table shows the possible assignments (unit: beats).

Set No.

Pad 1

Pad 2

Pad 3

Pad 4

Pad 5

Pad 6

Pad 7

Pad 8

0

1/4

1/2

1

2

4

8

16

32

1

1/8

1/4

1/2

1

2

4

8

16

2

1/16

1/8

1/4

1/2

1

2

4

8

3

1/32

1/16

1/8

1/4

1/2

1

2

4

Figure

Control

Description

1

PAD 1

Toggle Beatloop roll length index 1 (according parameter set)

2

PAD 2

Toggle Beatloop roll length index 2 (according parameter set)

3

PAD 3

Toggle Beatloop roll length index 3 (according parameter set)

4

PAD 4

Toggle Beatloop roll length index 4 (according parameter set)

5

PAD 5

Toggle Beatloop roll length index 5 (according parameter set)

6

PAD 6

Toggle Beatloop roll length index 6 (according parameter set)

7

PAD 7

Toggle Beatloop roll length index 7 (according parameter set)

8

PAD 8

Toggle Beatloop roll length index 8 (according parameter set)

13

PARAMETER LEFT

Decrement active looproll-interval parameter set (0-3), button LED is illuminated at parameter set 2, 3

14

PARAMETER RIGHT

Increment active looproll-interval parameter set (0-3), button LED is illuminated at parameter set 1, 3

SLICER Mode

For a detailed explanation of the slicer mode, take a look at the controller’s manual. A limited slicer functionality is implemented into the controller mapping as described below.

There are two slicer modes, continuous slice and loop slice, which can be selected by pressing the SLICER mode button. If none or only one pad (beat) is lit, continuous slice mode is active. If you press SLICER mode button again, loop slice mode will be activated and all pads, except one for the beat, will light up.

Starting with the first beat marked on a playing track, the track is divided into sections of 8 equal parts (not visible in waveform). If the first 8 parts are reached, the next section starts. The pads are assigned to one section, each time the active section changes, the pads will be assigned to the new active section (pad 1..8 = section part 1..8). The section size is dependent of the selected slicer domain, changeable by pressing SHIFT + PARAMETER LEFT or PARAMETER RIGHT. The default slicer domain is 8 beats, so each part represents the part between one beat and the following beat. Possible slicer domains are 8, 16, 32, 64 beats.

Figure

Control

Description

1

PAD 1

Press: Jumps to beat position 1 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

2

PAD 2

Press: Jumps to beat position 2 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

3

PAD 3

Press: Jumps to beat position 3 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

4

PAD 4

Press: Jumps to beat position 4 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

5

PAD 5

Press: Jumps to beat position 5 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

6

PAD 6

Press: Jumps to beat position 6 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

7

PAD 7

Press: Jumps to beat position 7 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

8

PAD 8

Press: Jumps to beat position 8 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (continuous slice only): Jumps to actual play position in the background (slip).

13

PARAMETER LEFT

Decrement active slicer quantization (1/8, 1/4, 1/2, 1 beat loop), button LED is illuminated at quantization 1/2, 1

13

SHIFT + PARAMETER LEFT

Decrement active slicer domain (8, 16, 32, 64 beats), button LED is illuminated at domain 32, 64

14

PARAMETER RIGHT

Increment active slicer quantization (1/8, 1/4, 1/2, 1 beat loop), button LED is illuminated at quantization 1/4, 1

14

SHIFT + PARAMETER RIGHT

Increment active slicer domain (8, 16, 32, 64 beats), button LED is illuminated at domain 16, 64

Continuous slice mode

The pad lights show the active part in the active section: The active part pad is lit, all other pad lights are off.

Continuous slice mode moves to the next section if the end of the previous active section is reached.

Pioneer DDJ SX Slicer (type 1)

Pioneer DDJ SX Slicer (type 1)

By pressing pad X, the play position jumps to the beat X of the active section. If you have pressed the pad on-beat and hold it, the play position is playing in loop. The beat loop length depends on the selected slicer quantization (changeable by pressing PARAMETER LEFT or PARAMETER RIGHT). If you release the pad, the playback will resume where the track would have been if the slicer wouldn’t have been activated (slip mode).

Loop slice mode

The pad lights show the active part in the active section: The active part pad light is off, all other pads are lit.

As soon as loop slice mode is activated, the active section is played in loop (not visible in waveform). If the end of the active section is reached, the play position jumps back to the beginning of the active section.

Pioneer DDJ SX Slicer (type 2)

Pioneer DDJ SX Slicer (type 2)

By pressing pad X, the play position jumps to the beat X of the active section. In loop slice mode beat loop is not possible.

As soon as loop slice mode is deactivated (by pressing SLICER mode button again), the playback will resume where the track would have been if the slicer wouldn’t have been activated (slip mode).

SAMPLER Mode

Figure

Control

Description

1

PAD 1

Sample deck index 1 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

1

SHIFT + hwlabel:PAD 1

Sample deck index 1 (according sampler bank) - playing: stop deck, stopped: eject track

2

PAD 2

Sample deck index 2 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

2

SHIFT + hwlabel:PAD 2

Sample deck index 2 (according sampler bank) - playing: stop deck, stopped: eject track

3

PAD 3

Sample deck index 3 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

3

SHIFT + hwlabel:PAD 3

Sample deck index 3 (according sampler bank) - playing: stop deck, stopped: eject track

4

PAD 4

Sample deck index 4 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

4

SHIFT + hwlabel:PAD 4

Sample deck index 4 (according sampler bank) - playing: stop deck, stopped: eject track

5

PAD 5

Sample deck index 5 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

5

SHIFT + hwlabel:PAD 5

Sample deck index 5 (according sampler bank) - playing: stop deck, stopped: eject track

6

PAD 6

Sample deck index 6 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

6

SHIFT + hwlabel:PAD 6

Sample deck index 6 (according sampler bank) - playing: stop deck, stopped: eject track

7

PAD 7

Sample deck index 7 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

7

SHIFT + hwlabel:PAD 7

Sample deck index 7 (according sampler bank) - playing: stop deck, stopped: eject track

8

PAD 8

Sample deck index 8 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck

8

SHIFT + hwlabel:PAD 8

Sample deck index 8 (according sampler bank) - playing: stop deck, stopped: eject track

13

PARAMETER LEFT

Decrement active sampler bank (0-3), button LED is illuminated at sampler bank 2, 3. Sampler bank 0: sampler 1-8, sampler bank 1: sampler 9-16 sampler bank 2: sampler 17-24, sampler bank 3: sampler 25-32

14

PARAMETER RIGHT

Increment active sampler bank (0-3), button LED is illuminated at sampler bank 1, 3. Sampler bank 0: sampler 1-8, sampler bank 1: sampler 9-16, sampler bank 2: sampler 17-24, sampler bank 3: sampler 25-32

BEATLOOP Mode (GROUP2)

By using the PARAMETER LEFT and PARAMETER RIGHT buttons in BEATLOOP mode (default parameter set: 0), you can change the pad-assigned loop size. The following table shows the possible assignments (unit: beats).

Set No.

Pad 1

Pad 2

Pad 3

Pad 4

Pad 5

Pad 6

Pad 7

Pad 8

0

1/4

1/2

1

2

4

8

16

32

1

1/8

1/4

1/2

1

2

4

8

16

2

1/16

1/8

1/4

1/2

1

2

4

8

3

1/32

1/16

1/8

1/4

1/2

1

2

4

Figure

Control

Description

1

PAD 1

Toggle Beatloop length index 1 (according parameter set)

2

PAD 2

Toggle Beatloop length index 2 (according parameter set)

3

PAD 3

Toggle Beatloop length index 3 (according parameter set)

4

PAD 4

Toggle Beatloop length index 4 (according parameter set)

5

PAD 5

Toggle Beatloop length index 5 (according parameter set)

6

PAD 6

Toggle Beatloop length index 6 (according parameter set)

7

PAD 7

Toggle Beatloop length index 7 (according parameter set)

8

PAD 8

Toggle Beatloop length index 8 (according parameter set)

13

PARAMETER LEFT

Decrement active loop-interval parameter set (0-3), button LED is illuminated at parameter set 2, 3

14

PARAMETER RIGHT

Increment active loop-interval parameter set (0-3), button LED is illuminated at parameter set 1, 3

Effect Functions

This controller mapping uses the standard Mixxx mapping for effects sections on controllers. The controls listed here are documented in Section 2 («Effects») of the owner’s manual.

Figure

Control

Description

1 (L)

FX1-1

Focused effect none: Controls EffectRack1-EffectUnit1/3-Effect1 meta, Focused effect 1..3: Controls effect parameter 1 of effect in EffectRack1-EffectUnit1/3

1 (L)

SHIFT + FX1-1

Controls effect selection for EffectRack1-EffectUnit1/3 effect 1

1 (R)

FX2-1

Focused effect none: Controls EffectRack1-EffectUnit2/4-Effect1 meta, Focused effect 1..3: Controls effect parameter 1 of focused effect in EffectRack1-EffectUnit2/4

1 (R)

SHIFT + hwlabel:FX2-1

Controls effect selection for EffectRack1-EffectUnit2/4 effect 1

2 (L)

FX1-2

Focused effect none: Controls EffectRack1-EffectUnit1/3-Effect2 meta, Focused effect 1..3: Controls effect parameter 2 of focused effect in EffectRack1-EffectUnit1/3

2 (L)

SHIFT + hwlabel:FX1-2

Controls effect selection for EffectRack1-EffectUnit1/3 effect 2

2 (R)

FX2-2

Focused effect none: Controls EffectRack1-EffectUnit2/4-Effect2 meta, Focused effect 1..3: Controls effect parameter 2 of focused effect in EffectRack1-EffectUnit2/4

2 (R)

SHIFT + hwlabel:FX2-2

Controls effect selection for EffectRack1-EffectUnit2/4 effect 2

3 (L)

FX1-3

Focused effect none: Controls EffectRack1-EffectUnit1/3-Effect3 meta, Focused effect 1..3: Controls effect parameter 3 of focused effect in EffectRack1-EffectUnit1/3

3 (L)

SHIFT + hwlabel:FX1-3

Controls effect selection for EffectRack1-EffectUnit1/3 effect 3

3 (R)

FX2-3

Focused effect none: Controls EffectRack1-EffectUnit2/4-Effect3 meta, Focused effect 1..3: Controls effect parameter 3 of focused effect in EffectRack1-EffectUnit2/4

3 (R)

SHIFT + hwlabel:FX2-3

Controls effect selection for EffectRack1-EffectUnit2/4 effect 3

4 (L)

FX1 BEATS

Controls EffectRack1-EffectUnit1/3 mix

4 (R)

FX2 BEATS

Controls EffectRack1-EffectUnit2/4 mix

4 (L)

SHIFT + hwlabel:FX1 BEATS

Controls EffectRack1-EffectUnit1/3 super1 knob

4 (R)

SHIFT + hwlabel:FX2 BEATS

Controls EffectRack1-EffectUnit2/4 super1 knob

5 (L)

FX1-1 ON

EffectFocusButton press and hold: focus EffectRack1-EffectUnit1/3-Effect1, else: Toggles EffectRack1-EffectUnit1/3-Effect1

5 (R)

FX2-1 ON

EffectFocusButton press and hold: focus EffectRack1-EffectUnit2/4-Effect1, else: Toggles EffectRack1-EffectUnit2/4-Effect1

6 (L)

FX1-2 ON

EffectFocusButton press and hold: focus EffectRack1-EffectUnit1/3-Effect2, else: Toggles EffectRack1-EffectUnit1/3-Effect2

6 (R)

FX2-2 ON

EffectFocusButton press and hold: focus EffectRack1-EffectUnit2/4-Effect2, else: Toggles EffectRack1-EffectUnit2/4-Effect2

7 (L)

FX1-3 ON

EffectFocusButton press and hold: focus EffectRack1-EffectUnit1/3-Effect3, else: Toggles EffectRack1-EffectUnit1/3-Effect3

7 (R)

FX2-3 ON

EffectFocusButton press and hold: focus EffectRack1-EffectUnit2/4-Effect3, else: Toggles EffectRack1-EffectUnit2/4-Effect3

8 (L)

FX1 TAP

EffectFocusButton of EffectRack1-EffectUnit1/3

8 (R)

FX2 TAP

EffectFocusButton of EffectRack1-EffectUnit2/4

8 (L)

SHIFT + hwlabel:FX1 TAP

Switch EffectUnit 1 <-> 3

8 (R)

SHIFT + hwlabel:FX2 TAP

Switch EffectUnit 2 <-> 4

9, 10, 11, 12

FX1 ASSIGN

Assign EffectRack1-EffectUnit1/3 to specific deck

13, 14, 15, 16

FX2 ASSIGN

Assign EffectRack1-EffectUnit2/4 to specific deck

17, 18, 19, 20

FILTER

Control QuickEffectRack1 super1 knob (e.g. moog filter)

Troubleshooting

If you experience any strange behavior of a button or a LED (e.g. wheel LEDs not working), make sure your controller is set up correctly to work with Mixxx. The DDJ-SX provides several settings, which can be changed in a special Utility-Mode.

Utility-Mode

  • Disconnect USB-cable.

  • Switch off STANDBY/ON the unit.

  • Hold SHIFT button and PLAY/PAUSE button at the left deck while switching on the unit STANDBY/ON.

  • Now Utility-Mode is activated.

  • For saving and exiting Utility-Mode, switch off the unit again STANDBY/ON.

Setting for usage of Serato DJ

To use the DDJ-SX with Mixxx, the controller must be configured for the usage of Serato DJ. You can check/change this setting by pressing the KEY LOCK button at the left deck.

  • KEY LOCK button off: Controller is configured for using Serato DJ (default).

  • KEY LOCK button on (lit): Controller is configured for using different DJ-software.