16.5. Mixxx Controls
Nearly every knob, button, or fader you see in Mixxx’s interface is controllable via Mixxx’s „control“ system. The control system allows skins, MIDI controllers, HID controllers and keyboards to control Mixxx via a single interface.
A control is identified by a „group“ (which is used for grouping associated controls) and a „key“ (the name of the individual control).
For example, the volume fader for Deck 1 is identified by the group
[Channel1]
and key volume
.
Similarly, the volume fader for Sampler 1 is identified by the group
[Sampler1]
and key volume
.
The group is used to collect all the controls that affect one component of Mixxx into one collection. Some groups have a high overlap of controls in common (e.g. samplers, decks, and the preview deck all share the same control keys).
In addition to controlling Mixxx, the control system can be used to
inspect Mixxx’s state. For example, the sample rate of the track loaded
in Deck 1 can be accessed via the [Channel1],track_samplerate
control. You can read the [Channel3],play
control to determine
whether Deck 3 is playing.
The default value range is 0.0 to 1.0, unless otherwise noted. Binary means that it is either ‚ON‘ (non-zero) or ‚OFF‘ (zero).
Rada
Discovering Controls used in Skins
You can view the control connected to any part of a skin by running
Mixxx with the --developer
command line option and hovering your mouse
cursor over part of the skin. If no tooltip appears, enable tooltips for
the Library and Skin in .
Rada
Changing any control from the GUI in Developer Mode
When running Mixxx in Developer Mode (with the --developer
command
line option), you can view and manually set the state of any control in
Mixxx by going to .
Rada
Simplify mapping of more complex behaviour
While simple mappings with just a few buttons, knobs and LEDs can easily be created with the MIDI Wizard and some basic scripting, implementing more complex behaviour like switching deck layers or pad grid modes can be tedious and error-prone. For these cases you can use Mixxx‘ Comonents-JS library which provides building blocks for single controls as well as entire containers like decks and effect units.
Viz také
See Control Index for a full list.
ControlPotMeter controls
The following extensions add some features to ControlPotMeter
controls
(volume, crossfader, …). Use in conjunction with [ChannelN]
,
[SamplerN]
, [Master]
, … groups.
Control Suffix |
Description, example |
---|---|
|
Increases the value, e.g. |
|
Decreases the value, sets the speed one step lower (4 % default) |
|
Increases the value by smaller step, sets the speed one small step higher (1 % default) |
|
Decreases the value by smaller step, sets the speed one small step lower (1 % default) |
|
Sets the value to 1.0, sets the channel volume to full |
|
Sets the value to -1.0, sets the channel volume to zero |
|
Input: sets the control to its default, return to default waveform zoom level |
|
Output: set to 1.0 if the control is at its default, light up the pitch fader center indicator |
|
Sets the value to 0.0, put the crossfader in the middle again |
|
Sets the value to 0.0 if the value was > 0.0, and to 1.0 if the value was 0.0, will cut off/on a track while you’re playing |
|
Sets the value to -1.0 if the value was > -1.0, and to 1.0 if the value was -1.0, can tilt the crossfader from left to right |
These controls can be used in JavaScript files like this:
// This won't work:
engine.setValue(group, "pitch_up_small", 1.0);
// Use this instead:
script.triggerControl(group, "pitch_up_small", 50);
To use *_toggle
the respective shortcut for scripts is:
script.toggleControl(group, "keylock_toggle", 100);
The [App]
group
The [App]
group contains controls that do not belong to a specific channel, the mixer or the effects engine.
- [App]indicator_250ms
Alternates between 0.0 and 1.0 every 250 milliseconds.
This control may be used to implement a blinking LED in JavaScript and is guaranteed to light up at the same time as
[ChannelN],cue_indicator
and[ChannelN],play_indicator
when these are blinking (depending on the currently chosen cue mode).- Range:
binary, read-only
- Feedback:
None
Nové ve verzi 2.4.0.
- [App]indicator_500ms
Alternates between 0.0 and 1.0 every 500 milliseconds.
This control may be used to implement a blinking LED in JavaScript and is guaranteed to light up at the same time as
[ChannelN],cue_indicator
and[ChannelN],play_indicator
when these are blinking (depending on the currently chosen cue mode).- Range:
binary, read-only
- Feedback:
None
Nové ve verzi 2.4.0.
- [App]num_decks
The number of decks currently enabled.
- Range:
integer
- Feedback:
None
Nové ve verzi 2.4.0: Replaces the deprecated
[Master],num_decks
control.
- [App]num_samplers
The number of samplers currently enabled.
- Range:
integer
- Feedback:
None
Nové ve verzi 2.4.0: Replaces the deprecated
[Master],num_samplers
control.
- [App]num_preview_decks
The number of preview decks currently enabled.
- Range:
integer
- Feedback:
None
Nové ve verzi 2.4.0: Replaces the deprecated
[Master],num_preview_decks
control.
- [App]num_microphones
The number of microphone inputs that can be configured.
- Range:
integer
- Feedback:
None
Nové ve verzi 2.4.0: Replaces the deprecated
[Master],num_microphones
control.
- [App]num_auxiliaries
The number of auxiliary inputs that can be configured.
- Range:
integer
- Feedback:
None
Nové ve verzi 2.4.0: Replaces the deprecated
[Master],num_auxiliaries
control.
- [App]samplerate
The current output sample rate (default: 44100 Hz).
- Range:
absolute value (in Hz)
- Feedback:
None
Nové ve verzi 2.4.0: Replaces the deprecated
[Master],samplerate
control.
The [Master]
group
The [Master]
group generally corresponds to controls that affect the mixing engine.
This will bear some similarity to what you will find on a DJ mixer (e.g. crossfader controls, headphone cueing controls, etc.).
- [Master]audio_latency_usage
Reflects fraction of latency, given by the audio buffer size, spend for audio processing inside Mixxx. At value near 25 % there is a high risk of buffer underflows
This is a ControlPotMeter control.
- Range:
0 .. 25 %
- Feedback:
latency meter
Nové ve verzi 2.0.0.
- [Master]audio_latency_overload
Indicates a buffer under or over-flow. Resets after 500 ms
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Overload indicator
Nové ve verzi 2.0.0.
- [Master]audio_latency_overload_count
Counts buffer over and under-flows. Max one per 500 ms
- Range:
0 .. n
- Feedback:
Counter in hardware preferences
Nové ve verzi 2.0.0.
- [Master]balance
Adjusts the left/right channel balance on the Main output.
This is a ControlPotMeter control.
- Range:
-1.0..1.0
- Feedback:
Center Balance knob
- [Master]booth_enabled
Indicates whether a Booth output is configured in the Sound Hardware Preferences.
- Range:
binary
- Feedback:
Booth gain knob shown or hidden
Nové ve verzi 2.1.0.
- [Master]booth_gain
Adjusts the gain of the Booth output.
This is a ControlPotMeter control.
- Range:
0.0…1.0…5.0
- Feedback:
Booth gain knob
Nové ve verzi 2.1.0.
- [Master]crossfader
Adjusts the crossfader between players/decks (-1.0 is all the way left).
This is a ControlPotMeter control.
- Range:
-1.0..1.0
- Feedback:
Crossfader slider
- [Master]crossfader_down
Moves the crossfader left by 1/10th.
- Range:
binary
- Feedback:
Crossfader slider
- [Master]crossfader_down_small
Moves the crossfader left by 1/100th.
- Range:
binary
- Feedback:
Crossfader slider
Nové ve verzi 1.10.0.
- [Master]crossfader_up
Moves the crossfader right by 1/10th.
- Range:
binary
- Feedback:
Crossfader slider
- [Master]crossfader_up_small
Moves the crossfader right by 1/100th.
- Range:
binary
- Feedback:
Crossfader slider
Nové ve verzi 1.10.0.
- [Master]duckStrength
Microphone ducking strength
This is a ControlPotMeter control.
- Range:
0.0..1.0
- Feedback:
Strength knob
Nové ve verzi 2.0.0.
- [Master]enabled
Indicator that the main mix is processed.
- Range:
binary
- Feedback:
None
Nové ve verzi 2.0.0.
- [Master]gain
Adjusts the gain for the main output as well as recording and broadcasting signal.
This is a ControlPotMeter control.
- Range:
0.0..1.0..5.0
- Feedback:
Main volume knob
Nové ve verzi 2.0.0.
- [Master]headEnabled
Indicator that the headphone mix is processed.
- Range:
binary
- Feedback:
None
Nové ve verzi 2.0.0.
- [Master]headGain
Adjusts the headphone output gain.
This is a ControlPotMeter control.
- Range:
0.0..1.0..5.0
- Feedback:
Headphone volume knob
Nové ve verzi 2.0.0.
- [Master]headMix
Adjusts the cue/main mix in the headphone output.
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Pre/Main knob
- [Master]headSplit
Splits headphone stereo cueing into right (main mono) and left (PFL mono).
- Range:
binary
- Feedback:
Split Cue button
Nové ve verzi 2.0.0.
- [Master]latency
Latency setting (sound buffer size) in milliseconds (default 64).
- Range:
>=0 (absolute value)
- Feedback:
Latency slider in the prefs
- [Master]num_effectsavailable
The number of available effects that can be selected in an effect slot.
- Range:
integer, read-only
- Feedback:
None
Nové ve verzi 2.1.0.
- [Master]PeakIndicator
Indicates when the signal is clipping (too loud for the hardware and is being distorted) (composite).
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light (mono)
- [Master]PeakIndicatorL
Indicates when the signal is clipping (too loud for the hardware and is being distorted) for the left channel.
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light (left)
- [Master]PeakIndicatorR
Indicates when the signal is clipping (too loud for the hardware and is being distorted) for the right channel.
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light (right)
- [Master]talkoverDucking
Toggle microphone ducking mode (OFF, AUTO, MANUAL)
- Range:
FIXME
- Feedback:
Ducking mode button
Nové ve verzi 2.0.0.
- [Master]VuMeter
Outputs the current instantaneous main volume (composite).
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Main meter (mono)
- [Master]VuMeterL
Outputs the current instantaneous main volume for the left channel.
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Main meter L
- [Master]VuMeterR
Outputs the current instantaneous main volume for the right channel.
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Main meter R
Decks, Preview Decks and Samplers
Each deck in Mixxx corresponds to a [ChannelN]
group.
Whenever you see [ChannelN]
, think „Deck N“.
N can range from 1 to the number of active decks in Mixxx.
Preview decks and Sample decks („samplers“) in Mixxx are identical to regular decks, they simply have a different purpose (previewing tracks or playing samples, respectively).
Any control listed above for [ChannelN]
will work for a samplers and preview decks, just replace [ChannelN]
with [PreviewDeckN]
or [SamplerN]
.
Viz také
There are some additional global controls for samplers.
- [ChannelN]back
- [PreviewDeckN]back
- [SamplerN]back
Fast rewind (REW)
- Range:
binary
- Feedback:
<< button
- [ChannelN]bpmlock
- [PreviewDeckN]bpmlock
- [SamplerN]bpmlock
Toggle the beatgrid/BPM lock state.
- Range:
binary
- Feedback:
The lock icon of the track is activated/deactivated.
Nové ve verzi 2.5.0.
- [ChannelN]beat_active
- [PreviewDeckN]beat_active
- [SamplerN]beat_active
Indicates, depending on the play direction, how the player is currently positioned to the closest beat.
An LED controlled by beat_active can be used for beat matching or for finding a beat using jog or control vinyl.
Poznámka
In case of fractional loops (e.g. 1/32), the rate of beat events can be very high. You should test if your controller is capable to process this update rate. If not, inhibt the beat indication for short loops, depending on the value of [ChannelN],beatloop_size.
Value
Play direction
Position
0
Set when play direction changes or +-20% of the distance to the previous/next beat is reached
1
Forward
Set at a beat
2
Reverse
Set at a beat
- Range:
real number, read-only
- Feedback:
None
Nové ve verzi 1.10.0: (Reverse indication added in 2.4.0)
- [ChannelN]beat_closest
- [PreviewDeckN]beat_closest
- [SamplerN]beat_closest
Its value is set to the sample position of the closest beat of the active beat and is used for updating the beat LEDs.
- Range:
-1, 0.0, real-valued
- Feedback:
None
- [ChannelN]beat_distance
- [PreviewDeckN]beat_distance
- [SamplerN]beat_distance
Outputs the relative position of the play marker in the section between the the previous and next beat marker.
- Range:
0.0 - 1.0, real-valued
- Feedback:
None
- [ChannelN]beatjump
- [PreviewDeckN]beatjump
- [SamplerN]beatjump
Jump forward (positive) or backward (negative) by N beats. If a loop is active, the loop is moved by X beats.
- Range:
any real number within the range, see
[ChannelN],beatloop_X_activate
- Feedback:
Player jumps forward or backward by X beats.
Nové ve verzi 2.0.0.
- [ChannelN]beatjump_size
- [PreviewDeckN]beatjump_size
- [SamplerN]beatjump_size
Set the number of beats to jump with
beatjump_forward
/beatjump_backward
.- Range:
positive real number
- Feedback:
Beatjump size spinbox
Nové ve verzi 2.1.0.
- [ChannelN]beatjump_size_halve
- [PreviewDeckN]beatjump_size_halve
- [SamplerN]beatjump_size_halve
Halve the value of
beatjump_size
.- Range:
binary
- Feedback:
Beatjump size spinbox
Nové ve verzi 2.4.0.
- [ChannelN]beatjump_size_double
- [PreviewDeckN]beatjump_size_double
- [SamplerN]beatjump_size_double
Double the value of
beatjump_size
.- Range:
binary
- Feedback:
Beatjump size spinbox
Nové ve verzi 2.4.0.
- [ChannelN]beatjump_forward
- [PreviewDeckN]beatjump_forward
- [SamplerN]beatjump_forward
Jump forward by
beatjump_size
. If a loop is active, the loop is moved forward by X beats.- Range:
binary
- Feedback:
Player jumps forward by
beatjump_size
.
Nové ve verzi 2.1.0.
- [ChannelN]beatjump_backward
- [PreviewDeckN]beatjump_backward
- [SamplerN]beatjump_backward
Jump backward by
beatjump_size
. If a loop is active, the loop is moved backward by X beats.- Range:
binary
- Feedback:
Player jumps backward by
beatjump_size
.
Nové ve verzi 2.1.0.
- [ChannelN]beatjump_X_forward
- [PreviewDeckN]beatjump_X_forward
- [SamplerN]beatjump_X_forward
Jump forward by X beats. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512. If a loop is active, the loop is moved forward by X beats.
- Range:
binary
- Feedback:
Player jumps forward by X beats.
Nové ve verzi 2.0.0.
- [ChannelN]beatjump_X_backward
- [PreviewDeckN]beatjump_X_backward
- [SamplerN]beatjump_X_backward
Jump backward by X beats. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512. If a loop is active, the loop is moved backward by X beats.
- Range:
binary
- Feedback:
Player jumps backward by X beats.
Nové ve verzi 2.0.0.
- [ChannelN]beatloop_activate
- [PreviewDeckN]beatloop_activate
- [SamplerN]beatloop_activate
Set a loop that is
beatloop_size
beats long and enables the loop- Range:
binary
- Feedback:
A loop is shown over
beatloop_size
beats
Nové ve verzi 2.1.0.
- [ChannelN]beatloop_X_activate
- [PreviewDeckN]beatloop_X_activate
- [SamplerN]beatloop_X_activate
Activates a loop over X beats. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
- Range:
binary
- Feedback:
A loop is shown over X beats.
Nové ve verzi 1.10.0.
- [ChannelN]beatloop_size
- [PreviewDeckN]beatloop_size
- [SamplerN]beatloop_size
Set the length of the loop in beats that will get set with
beatloop_activate
andbeatlooproll_activate
. Changing this will resize an existing loop if the length of the loop matchesbeatloop_size
.- Range:
positive real number
- Feedback:
Beatloop size spinbox and possibly loop section on waveform
Nové ve verzi 2.1.0.
- [ChannelN]beatloop_X_toggle
- [PreviewDeckN]beatloop_X_toggle
- [SamplerN]beatloop_X_toggle
Toggles a loop over X beats. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
- Range:
binary
- Feedback:
A loop is shown over X beats.
Nové ve verzi 1.10.0.
- [ChannelN]beatloop_X_enabled
- [PreviewDeckN]beatloop_X_enabled
- [SamplerN]beatloop_X_enabled
1 if beatloop X is enabled, 0 if not.
- Range:
binary
- Feedback:
Beatloop X button in skin is lit.
Nové ve verzi 1.10.0.
- [ChannelN]beatlooproll_activate
- [PreviewDeckN]beatlooproll_activate
- [SamplerN]beatlooproll_activate
Activates a rolling loop over
beatloop_size
beats. Once disabled, playback will resume where the track would have been if it had not entered the loop.- Range:
binary
- Feedback:
A loop overlay is shown over
beatloop_size
beats on waveform.
Nové ve verzi 2.1.0.
- [ChannelN]beatlooproll_X_activate
- [PreviewDeckN]beatlooproll_X_activate
- [SamplerN]beatlooproll_X_activate
Activates a rolling loop over X beats. Once disabled, playback will resume where the track would have been if it had not entered the loop. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
- Range:
binary
- Feedback:
Beatloop X button in skin is lit. A loop overlay is shown over X beats on waveform.
Nové ve verzi 1.11.0.
- [ChannelN]beats_adjust_faster
- [PreviewDeckN]beats_adjust_faster
- [SamplerN]beats_adjust_faster
Adjust the average BPM up by +0.01
- Range:
binary
- Feedback:
The beatgrid lines move closer to each other.
Nové ve verzi 2.0.0.
- [ChannelN]beats_adjust_slower
- [PreviewDeckN]beats_adjust_slower
- [SamplerN]beats_adjust_slower
Adjust the average BPM down by -0.01.
- Range:
binary
- Feedback:
The beatgrid lines move further apart from each other.
Nové ve verzi 2.0.0.
- [ChannelN]beats_translate_curpos
- [PreviewDeckN]beats_translate_curpos
- [SamplerN]beats_translate_curpos
Adjust beatgrid so closest beat is aligned with the current playposition.
- Range:
binary
- Feedback:
The beatgrid moves to align with current playposition.
Nové ve verzi 1.10.0.
- [ChannelN]beats_translate_match_alignment
- [PreviewDeckN]beats_translate_match_alignment
- [SamplerN]beats_translate_match_alignment
Adjust beatgrid to match another playing deck.
- Range:
binary
- Feedback:
Instead of syncing the beatgrid to the current playposition, sync the beatgrid so the nearest beat lines up with the other track’s nearest beat.
Nové ve verzi 2.0.0.
- [ChannelN]beats_translate_earlier
- [PreviewDeckN]beats_translate_earlier
- [SamplerN]beats_translate_earlier
Move beatgrid to an earlier position.
- Range:
binary
- Feedback:
The beatgrid moves left by a small amount.
Nové ve verzi 2.0.0.
- [ChannelN]beats_translate_later
- [PreviewDeckN]beats_translate_later
- [SamplerN]beats_translate_later
Move beatgrid to a later position.
- Range:
binary
- Feedback:
The beatgrid moves right by a small amount.
Nové ve verzi 2.0.0.
- [ChannelN]beats_undo_adjustment
- [PreviewDeckN]beats_undo_adjustment
- [SamplerN]beats_undo_adjustment
Restores the beatgrid state before the last beatgrid adjustment done with the above beats_ controls.
The undo stack holds up to ten beatgrid states. For changes done in quick succession (less than 800 milliseconds between actions), e.g. repeated
beats_translate_earlier
, only the first state is stored.- Range:
binary
- Feedback:
The beatgrid is restored.
Nové ve verzi 2.5.0.
- [ChannelN]beatsync
- [PreviewDeckN]beatsync
- [SamplerN]beatsync
Syncs the tempo and phase (depending on quantize) to that of the other track (if BPM is detected on both).
- range:
binary
- feedback:
The Sync button flashes and the tempo slider snaps to the appropriate value.
Změněno ve verzi 1.10.0.
- [ChannelN]beatsync_phase
- [PreviewDeckN]beatsync_phase
- [SamplerN]beatsync_phase
Syncs the phase to that of the other track (if BPM is detected on both).
- Range:
binary
- Feedback:
The Sync button flashes and the tempo slider snap to the appropriate value.
Nové ve verzi 1.10.0.
- [ChannelN]beatsync_tempo
- [PreviewDeckN]beatsync_tempo
- [SamplerN]beatsync_tempo
Syncs the tempo to that of the other track (if BPM is detected on both).
- Range:
binary
- Feedback:
The Sync button flashes and the tempo slider snaps to the appropriate value.
Nové ve verzi 1.10.0.
- [ChannelN]bpm
- [PreviewDeckN]bpm
- [SamplerN]bpm
Reflects the perceived (rate-adjusted) BPM of the loaded file.
This is a ControlPotMeter control.
- Range:
real-valued
- Feedback:
BPM value display
Změněno ve verzi 1.10.0.
- [ChannelN]bpm_tap
- [PreviewDeckN]bpm_tap
- [SamplerN]bpm_tap
When tapped repeatedly, adjusts the BPM of the track on the deck (not the tempo slider!) to match the taps.
Poznámka
If you want to change the rate of the deck use script.bpm.tapButton(deck) in your controller mapping instead.
- Range:
binary
- Feedback:
BPM value display (playback speed doesn’t change)
Nové ve verzi 1.9.2.
- [ChannelN]CloneFromDeck
- [PreviewDeckN]CloneFromDeck
- [SamplerN]CloneFromDeck
Clone the given deck number, copying the play state, position, rate, and key. If 0 or a negative number is given, Mixxx will attempt to select the first playing deck as the source for the clone.
- Range:
integer between 1 and
[Master],num_decks
(inclusive)- Feedback:
The channel will start playing at the rate and position of the source deck.
Nové ve verzi 2.3.0.
- [ChannelN]CloneFromSampler
- [PreviewDeckN]CloneFromSampler
- [SamplerN]CloneFromSampler
Clone the given sampler number, copying the play state, position, rate, and key.
- Range:
integer between 1 and
[App],num_samplers
(inclusive)- Feedback:
The channel will start playing at the rate and position of the source deck.
Nové ve verzi 2.3.0.
- [ChannelN]LoadTrackFromDeck
- [PreviewDeckN]LoadTrackFromDeck
- [SamplerN]LoadTrackFromDeck
Load the track currently loaded to the given deck number.
- Range:
integer between 1 and
[App],num_decks
(inclusive)- Feedback:
Track name & waveform change
Nové ve verzi 2.4.0.
- [ChannelN]LoadTrackFromSampler
- [PreviewDeckN]LoadTrackFromSampler
- [SamplerN]LoadTrackFromSampler
Load the track currently loaded to the given sampler number.
- Range:
integer between 1 and
[App],num_samplers
(inclusive)- Feedback:
Track name & waveform change
Nové ve verzi 2.4.0.
- [ChannelN]cue_cdj
- [PreviewDeckN]cue_cdj
- [SamplerN]cue_cdj
Represents a Cue button that is always in CDJ mode.
- Range:
binary
- Feedback:
None
Nové ve verzi 1.10.0.
- [ChannelN]cue_clear
- [PreviewDeckN]cue_clear
- [SamplerN]cue_clear
Deletes the already set cue point and sets
[ChannelN],cue_point
to -1.- Range:
binary
- Feedback:
None
- [ChannelN]cue_goto
- [PreviewDeckN]cue_goto
- [SamplerN]cue_goto
If the cue point is set, recalls the cue point.
- Range:
binary
- Feedback:
Player may change position
- [ChannelN]cue_default
- [PreviewDeckN]cue_default
- [SamplerN]cue_default
In CDJ mode, when playing, returns to the cue point and pauses. If stopped, sets a cue point at the current location. If stopped and at a cue point, plays from that point until released (set to 0.)
- Range:
binary
- Feedback:
Cue button
- [ChannelN]cue_gotoandplay
- [PreviewDeckN]cue_gotoandplay
- [SamplerN]cue_gotoandplay
If the cue point is set, seeks the player to it and starts playback.
- Range:
binary
- Feedback:
Player may change position and start playing.
Nové ve verzi 1.11.0.
- [ChannelN]cue_gotoandstop
- [PreviewDeckN]cue_gotoandstop
- [SamplerN]cue_gotoandstop
If the cue point is set, seeks the player to it and stops.
- Range:
binary
- Feedback:
Player may change position.
Nové ve verzi 1.11.0.
- [ChannelN]cue_indicator
- [PreviewDeckN]cue_indicator
- [SamplerN]cue_indicator
Indicates the blinking pattern of the CUE button (i.e. 1.0 if the button is illuminated, 0.0 otherwise), depending on the chosen
cue mode
.- Range:
binary
- Feedback:
Cue button
Nové ve verzi 2.0.0.
- [ChannelN]cue_mode
- [PreviewDeckN]cue_mode
- [SamplerN]cue_mode
Represents the currently chosen cue mode.
- Range:
Value
compatible hardware
0.0
Mixxx mode (default)
1.0
Pioneer mode
2.0
Denon mode
3.0
Numark mode
4.0
Mixxx mode (no blinking)
5.0
CUP (Cue + Play) mode
- Feedback:
None
- [ChannelN]cue_play
- [PreviewDeckN]cue_play
- [SamplerN]cue_play
Go to cue point and play after release (CUP button behavior). If stopped, sets a cue point at the current location.
- Range:
binary
- Feedback:
None
Nové ve verzi 2.1.0.
- [ChannelN]cue_point
- [PreviewDeckN]cue_point
- [SamplerN]cue_point
The current position of the cue point in samples.
- Range:
absolute value
- Feedback:
Cue point marker
- [ChannelN]cue_preview
- [PreviewDeckN]cue_preview
- [SamplerN]cue_preview
Plays from the current cue point.
- Range:
binary
- Feedback:
Cue button lights and waveform moves
- [ChannelN]cue_set
- [PreviewDeckN]cue_set
- [SamplerN]cue_set
Sets a cue point at the current location.
- Range:
binary
- Feedback:
Cue mark appears on the waveform
- [ChannelN]cue_simple
- [PreviewDeckN]cue_simple
- [SamplerN]cue_simple
If the player is not playing, set the cue point at the current location otherwise seek to the cue point.
- Range:
binary
- Feedback:
Cue button
- [ChannelN]duration
- [PreviewDeckN]duration
- [SamplerN]duration
Outputs the length of the current song in seconds
- Range:
absolute value
- Feedback:
None
- [ChannelN]eject
- [PreviewDeckN]eject
- [SamplerN]eject
Eject currently loaded track. If no track is loaded the last-ejected track (of any deck) is reloaded.
Double-press to reload the last replaced track. If no track is loaded the second-last ejected track is reloaded.
- Range:
binary
- Feedback:
Eject button is lit. Be sure to set back to 0 with scripts so the button does not stay lit.
Nové ve verzi 1.9.0.
- [ChannelN]end
- [PreviewDeckN]end
- [SamplerN]end
Jump to end of track
- Range:
binary
- Feedback:
Track jumps to end
- [ChannelN]end_of_track
- [PreviewDeckN]end_of_track
- [SamplerN]end_of_track
Switches to 1 if the play position is within the end range defined in
.- Range:
binary, read-only
- Feedback:
Waveform and Overview widgets show a flashing border
- [ChannelN]file_bpm
- [PreviewDeckN]file_bpm
- [SamplerN]file_bpm
The detected BPM of the loaded track.
- Range:
positive value, read-only
- Feedback:
None
- [ChannelN]file_key
- [PreviewDeckN]file_key
- [SamplerN]file_key
The detected key of the loaded track.
- Range:
?, read-only
- Feedback:
None
Nové ve verzi 2.0.0.
- [ChannelN]hotcue_X_activate
- [PreviewDeckN]hotcue_X_activate
- [SamplerN]hotcue_X_activate
If hotcue X is not set, this sets a hotcue at the current play position and saves it as hotcue X of
type
„Hotcue“. In case a loop is currently enabled (i.e. if [ChannelN],loop_enabled is set to 1), the loop will be saved as hotcue X instead andhotcue_X_type
will be set to „Loop“.If hotcue X has been set as a regular cue point, the player seeks to the saved play position.
If
hotcue_X_type
is „Loop“, looping will be enabled and the loop controls (e.g.loop_start_position
,loop_end_position
andbeatloop_size
) will be set accordingly. Just likereloop_toggle
, the player seeks back to the loop start when the current play position is behind the loop, and enabled without a seek when it is in front of or inside the loop. This allows a loop catching behavior on one hand and a jump back when the loop has been exit by just triggering this control.Setting the control to 1 when the track is currently not playing (i.e.
play
is set to 0) will start hotcue previewing. After resetting the control to 0, playback will usually be stopped and the player will seek to the hotcue position. Ifplay
is set to 1 while previewing is active, the playback will continue and no seek occurs.- Range:
binary
- Feedback:
Player may change position. Hotcue X marker may change on waveform.
Nové ve verzi 1.8.0.
Změněno ve verzi 2.4.0: Added support for saved loops.
- [ChannelN]hotcue_X_activatecue
- [PreviewDeckN]hotcue_X_activatecue
- [SamplerN]hotcue_X_activatecue
Identical to
hotcue_X_activate
, but this always sets a regular cue point, regardless of whether a loop is enabled or not. This control can be used for controllers that have dedicated hotcue/saved loop pad modes.Nové ve verzi 2.4.0.
- [ChannelN]hotcue_X_activateloop
- [PreviewDeckN]hotcue_X_activateloop
- [SamplerN]hotcue_X_activateloop
Identical to
hotcue_X_activate
, but this always sets a saved loop, regardless of whether a loop is enabled or not. If no loop is available, this sets and enables a beat loop of ofbeatloop_size
. This control can be used for controllers that have dedicated hotcue/saved loop pad modes.Nové ve verzi 2.4.0.
- [ChannelN]hotcue_X_cueloop
- [PreviewDeckN]hotcue_X_cueloop
- [SamplerN]hotcue_X_cueloop
Enables or disables a loop from the position of hotcue X. If X is a saved loop, that loop will be used, otherwise it will set a beatloop of
beatloop_size
from the cue position. In case the hotcue is not set, this control will set a regular cue point at the current position and start a beatloop.This control can be used to map the primary action of the „Cue Loop“ performance pad mode on Serato-style controllers.
Nové ve verzi 2.4.0.
- [ChannelN]hotcue_X_clear
- [PreviewDeckN]hotcue_X_clear
- [SamplerN]hotcue_X_clear
If hotcue X is set, clears its hotcue status.
- Range:
binary
- Feedback:
Hotcue X marker changes on waveform.
Nové ve verzi 1.8.0.
- [ChannelN]hotcue_X_color
- [PreviewDeckN]hotcue_X_color
- [SamplerN]hotcue_X_color
Color of hotcue X or -1 if the hotcue is not set.
- Range:
3-Byte RGB color code (or -1)
- Feedback:
Color of Hotcue X button and waveform marker changes.
Nové ve verzi 2.3.0.
- [ChannelN]hotcue_X_status
- [PreviewDeckN]hotcue_X_status
- [SamplerN]hotcue_X_status
Indicates if hotcue slot X is set, active or empty.
- Range (read-only):
Value
Meaning
0
Hotcue X is not set
1
Hotcue X is set
2
Hotcue X is active (saved loop is enabled or hotcue is previewing)
Nové ve verzi 2.4.0: Replaces the deprecated
[ChannelN],hotcue_X_enabled
.
- [ChannelN]hotcue_X_type
- [PreviewDeckN]hotcue_X_type
- [SamplerN]hotcue_X_type
Indicates the type of the hotcue in hotcue slot X.
- Range (read-only):
Value
Type
0
Invalid/Not Set
1
Hotcue
4
Saved Loop
Nové ve verzi 2.4.0.
- [ChannelN]hotcue_X_goto
- [PreviewDeckN]hotcue_X_goto
- [SamplerN]hotcue_X_goto
If hotcue X is set, seeks the player to hotcue X’s position.
- Range:
binary
- Feedback:
Player may change position.
Nové ve verzi 1.8.0.
- [ChannelN]hotcue_X_gotoandplay
- [PreviewDeckN]hotcue_X_gotoandplay
- [SamplerN]hotcue_X_gotoandplay
If hotcue X is set, seeks the player to hotcue X’s position and starts playback.
- Range:
binary
- Feedback:
Player may change position.
Nové ve verzi 1.11.0.
- [ChannelN]hotcue_X_gotoandloop
- [PreviewDeckN]hotcue_X_gotoandloop
- [SamplerN]hotcue_X_gotoandloop
If hotcue X is set, seeks the player to hotcue X’s position, starts playback and looping. If the hotcue is a saved loop, the loop is enabled, otherwise a beatloop of
beatloop_size
is set from the hotcue’s position.This control can be used to map the secondary action of the „Cue Loop“ performance pad mode on Serato-style controllers.
- Range:
binary
- Feedback:
Player may change position and looping is enabled.
Nové ve verzi 2.4.0.
- [ChannelN]hotcue_X_gotoandstop
- [PreviewDeckN]hotcue_X_gotoandstop
- [SamplerN]hotcue_X_gotoandstop
If hotcue X is set, seeks the player to hotcue X’s position and stops.
- Range:
binary
- Feedback:
Player may change position.
Nové ve verzi 1.8.0.
- [ChannelN]hotcue_X_position
- [PreviewDeckN]hotcue_X_position
- [SamplerN]hotcue_X_position
The position of hotcue X in samples, -1 if not set.
- Range:
positive integer
- Feedback:
Hotcue X marker changes on waveform.
Nové ve verzi 1.8.0.
- [ChannelN]hotcue_X_set
- [PreviewDeckN]hotcue_X_set
- [SamplerN]hotcue_X_set
Set a hotcue at the current play position and saves it as hotcue X of
type
„Hotcue“. In case a loop is currently enabled (i.e. if [ChannelN],loop_enabled is set to 1), the loop will be saved as hotcue X instead andhotcue_X_type
will be set to „Loop“.- Range:
binary
- Feedback:
Hotcue X marker changes on waveform.
Nové ve verzi 1.8.0.
Změněno ve verzi 2.4.0.
- [ChannelN]hotcue_X_setcue
- [PreviewDeckN]hotcue_X_setcue
- [SamplerN]hotcue_X_setcue
Identical to
hotcue_X_set
, but this always sets a regular cue point (i.e.hotcue_X_type
„Hotcue“), regardless of whether a loop is enabled or not.This control can be used for controllers that have dedicated hotcue/saved loop pad modes.
Nové ve verzi 2.4.0.
- [ChannelN]hotcue_X_setloop
- [PreviewDeckN]hotcue_X_setloop
- [SamplerN]hotcue_X_setloop
Identical to
hotcue_X_set
, but this always saves a loop (i.e.hotcue_X_type
„Loop“), regardless of whether a loop is enabled or not. If no loop is available, this sets and enables a beat loop of ofbeatloop_size
. This control can be used for controllers that have dedicated hotcue/saved loop pad modes.Nové ve verzi 2.4.0.
- [ChannelN]hotcue_focus
- [PreviewDeckN]hotcue_focus
- [SamplerN]hotcue_focus
Contains the number of the most recently used hotcue (or -1 if no hotcue was used).
- Range:
positive integer (or -1)
- Feedback:
None
Nové ve verzi 2.3.0.
- [ChannelN]hotcue_focus_color_prev
- [PreviewDeckN]hotcue_focus_color_prev
- [SamplerN]hotcue_focus_color_prev
If there is a focused hotcue, sets its color to the previous color in the palette.
- Range:
binary
- Feedback:
Color of focused hotcue button and waveform marker changes.
Nové ve verzi 2.3.0.
- [ChannelN]hotcue_focus_color_next
- [PreviewDeckN]hotcue_focus_color_next
- [SamplerN]hotcue_focus_color_next
If there is a focused hotcue, sets its color to the next color in the palette.
- Range:
binary
- Feedback:
Color of focused hotcue button and waveform marker changes.
Nové ve verzi 2.3.0.
- [ChannelN]intro_end_activate
- [PreviewDeckN]intro_end_activate
- [SamplerN]intro_end_activate
If the intro end cue is set, seeks the player to the intro end position. If the intro end is not set, sets the intro end to the current play position.
- Range:
binary
- Feedback:
Player may change position. Intro end marker may change on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]intro_end_clear
- [PreviewDeckN]intro_end_clear
- [SamplerN]intro_end_clear
If the intro end cue is set, clears its status.
- Range:
binary
- Feedback:
Intro end marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]intro_end_enabled
- [PreviewDeckN]intro_end_enabled
- [SamplerN]intro_end_enabled
1 if intro end cue is set, (position is not -1), 0 otherwise.
- Range:
binary, read-only
- Feedback:
Intro end button lights up.
Nové ve verzi 2.3.0.
- [ChannelN]intro_end_position
- [PreviewDeckN]intro_end_position
- [SamplerN]intro_end_position
The position of the intro end in samples, -1 if not set.
- Range:
positive integer
- Feedback:
Intro end marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]intro_end_set
- [PreviewDeckN]intro_end_set
- [SamplerN]intro_end_set
Set intro end to the current play position. If intro end was previously set, it is moved to the new position.
- Range:
binary
- Feedback:
Intro end marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]intro_start_activate
- [PreviewDeckN]intro_start_activate
- [SamplerN]intro_start_activate
If the intro start cue is set, seeks the player to the intro start position. If the intro start is not set, sets the intro start to the current play position.
- Range:
binary
- Feedback:
Player may change position. Intro start marker may change on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]intro_start_clear
- [PreviewDeckN]intro_start_clear
- [SamplerN]intro_start_clear
If the intro start cue is set, clears its status.
- Range:
binary
- Feedback:
Intro start marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]intro_start_enabled
- [PreviewDeckN]intro_start_enabled
- [SamplerN]intro_start_enabled
1 if intro start cue is set, (position is not -1), 0 otherwise.
- Range:
binary, read-only
- Feedback:
Intro start button lights up.
Nové ve verzi 2.3.0.
- [ChannelN]intro_start_position
- [PreviewDeckN]intro_start_position
- [SamplerN]intro_start_position
The position of the intro start in samples, -1 if not set.
- Range:
positive integer
- Feedback:
Intro start marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]intro_start_set
- [PreviewDeckN]intro_start_set
- [SamplerN]intro_start_set
Set intro start to the current play position. If intro start was previously set, it is moved to the new position.
- Range:
binary
- Feedback:
Intro start marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]key
- [PreviewDeckN]key
- [SamplerN]key
Current key of the track
- Range:
Value
OpenKey
Lancelot
Traditional
1
1d
8b
C
2
8d
3b
D♭
3
3d
10b
D
4
10d
5b
E♭
5
5d
12b
E
6
12d
7b
F
7
7d
2b
F♯/G♭
8
2d
9b
G
9
9d
4b
A♭
10
4d
11b
A
11
11d
6b
B♭
12
6d
1b
B
13
10m
5a
Cm
14
5m
12a
C♯m
15
12m
7a
Dm
16
7m
2a
D♯m/E♭m
17
2m
9a
Em
18
9m
4a
Fm
19
4m
11a
F♯m
20
11m
6a
Gm
21
6m
1a
G♯m
22
1m
8a
Am
23
8m
3a
B♭m
24
3m
10a
Bm
Nové ve verzi 2.0.0.
- [ChannelN]keylock
- [PreviewDeckN]keylock
- [SamplerN]keylock
Enable key-lock for the specified deck (rate changes only affect tempo, not key)
- Range:
binary
- Feedback:
key-lock button activates
Nové ve verzi 1.9.0.
- [ChannelN]LoadSelectedTrack
- [PreviewDeckN]LoadSelectedTrack
- [SamplerN]LoadSelectedTrack
Loads the currently highlighted track into the deck
- Range:
binary
- Feedback:
Track name & waveform change
- [ChannelN]LoadSelectedTrackAndPlay
- [PreviewDeckN]LoadSelectedTrackAndPlay
- [SamplerN]LoadSelectedTrackAndPlay
Loads the currently highlighted track into the deck and starts playing.
If the player is a preview deck and the selected track is already loaded, toggle play/pause.
- Range:
binary
- Feedback:
Track name & waveform change & Play/pause button
Nové ve verzi 1.11.0.
- [ChannelN]local_bpm
- [PreviewDeckN]local_bpm
- [SamplerN]local_bpm
Reflects the average bpm around the current play position of the loaded file.
- Range:
positive value
- Feedback:
None
- [ChannelN]loop_double
- [PreviewDeckN]loop_double
- [SamplerN]loop_double
Doubles
beatloop_size
. Ifbeatloop_size
equals the size of the loop, the loop is resized.If a saved loop is currently enabled, the modification is saved to the hotcue slot immediately.
- Range:
binary
- Feedback:
Beatloop size spinbox changes
Nové ve verzi 1.10.0.
Změněno ve verzi 2.1.0.
Změněno ve verzi 2.4.0: Added support for saved loops.
- [ChannelN]loop_enabled
- [PreviewDeckN]loop_enabled
- [SamplerN]loop_enabled
Indicates whether or not a loop is enabled.
- Range:
binary
- Feedback:
Loop in waveform is active.
Nové ve verzi 1.8.0.
Změněno ve verzi 2.4.0: Control is not longer read-only and can be used to enable/disable looping.
- [ChannelN]loop_remove
- [PreviewDeckN]loop_remove
- [SamplerN]loop_remove
Clears the last active loop, i.e. deactivates and removes loop, detaches
loop_in
,loop_out
,reloop_toggle
and related controls. It does not affect saved loops.- Range:
binary
- Feedback:
Last active loop is disabled and removed from waveform and overview.
Nové ve verzi 2.4.0.
- [ChannelN]loop_end_position
- [PreviewDeckN]loop_end_position
- [SamplerN]loop_end_position
The player loop-out position in samples, -1 if not set.
- Range:
positive integer
- Feedback:
Loop-out marker shows on waveform.
Nové ve verzi 1.8.0.
- [ChannelN]loop_halve
- [PreviewDeckN]loop_halve
- [SamplerN]loop_halve
Halves
beatloop_size
. Ifbeatloop_size
equals the size of the loop, the loop is resized.If a saved loop is currently enabled, the modification is saved to the hotcue slot immediately.
- Range:
binary
- Feedback:
Beatloop size spinbox changes
Nové ve verzi 1.10.0.
Změněno ve verzi 2.1.0.
Změněno ve verzi 2.4.0: Added support for saved loops.
- [ChannelN]loop_in
- [PreviewDeckN]loop_in
- [SamplerN]loop_in
If loop is disabled, sets the player loop in position to the current play position. If loop is enabled, press and hold to move loop in position to the current play position. If quantize is enabled,
beatloop_size
will be updated to reflect the new loop size.- Range:
binary
- Feedback:
Loop-in marker changes on waveform.
Nové ve verzi 1.8.0.
Změněno ve verzi 2.1.0.
- [ChannelN]loop_in_goto
- [PreviewDeckN]loop_in_goto
- [SamplerN]loop_in_goto
Seek to the loop in point.
- Range:
binary
- Feedback:
Waveform position jumps
Nové ve verzi 2.1.0.
- [ChannelN]loop_out
- [PreviewDeckN]loop_out
- [SamplerN]loop_out
If loop is disabled, sets the player loop out position to the current play position. If loop is enabled, press and hold to move loop out position to the current play position. If quantize is enabled,
beatloop_size
will be updated to reflect the new loop size.- Range:
binary
- Feedback:
Loop-out marker changes on waveform.
Nové ve verzi 1.8.0.
Změněno ve verzi 2.1.0.
- [ChannelN]loop_out_goto
- [PreviewDeckN]loop_out_goto
- [SamplerN]loop_out_goto
Seek to the loop out point.
- Range:
binary
- Feedback:
Waveform position jumps
Nové ve verzi 2.1.0.
- [ChannelN]loop_move
- [PreviewDeckN]loop_move
- [SamplerN]loop_move
Move loop forward by X beats (positive) or backward by X beats (negative).
If a saved loop is currently enabled, the modification is saved to the hotcue slot immediately.
- Range:
real number
- Feedback:
Loop moves forward or backward by X beats.
Nové ve verzi 2.0.0.
Změněno ve verzi 2.4.0: Added support for saved loops.
- [ChannelN]loop_move_X_forward
- [PreviewDeckN]loop_move_X_forward
- [SamplerN]loop_move_X_forward
Moves the loop in and out points forward by X beats. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
- Range:
binary
- Feedback:
Loop moves forward by X beats.
If a saved loop is currently enabled, the modification is saved to the hotcue slot immediately.
Nové ve verzi 2.0.0.
Změněno ve verzi 2.4.0: Added support for saved loops.
- [ChannelN]loop_move_X_backward
- [PreviewDeckN]loop_move_X_backward
- [SamplerN]loop_move_X_backward
Loop moves by X beats. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
If a saved loop is currently enabled, the modification is saved to the hotcue slot immediately.
- Range:
binary
- Feedback:
Loop moves backward by X beats.
Nové ve verzi 2.0.0.
Změněno ve verzi 2.4.0: Added support for saved loops.
- [ChannelN]loop_scale
- [PreviewDeckN]loop_scale
- [SamplerN]loop_scale
Scale the loop length by the value scale is set to by moving the end marker.
beatloop_size
is not updated to reflect the change.If a saved loop is currently enabled, the modification is saved to the hotcue slot immediately.
- Range:
0.0 - infinity
- Feedback:
Loop length is scaled by given amount on waveform.
Nové ve verzi 1.10.0.
Změněno ve verzi 2.4.0: Added support for saved loops.
- [ChannelN]loop_start_position
- [PreviewDeckN]loop_start_position
- [SamplerN]loop_start_position
The player loop-in position in samples, -1 if not set.
- Range:
positive integer
- Feedback:
Loop-in marker changes on waveform.
Nové ve verzi 1.8.0.
- [ChannelN]orientation
- [PreviewDeckN]orientation
- [SamplerN]orientation
Set channel orientation for the crossfader.
- Range:
Value
Meaning
0
Left side of crossfader
1
Center (not affected by crossfader)
2
Right side of crossfader
- Feedback:
None
Nové ve verzi 1.9.0.
- [ChannelN]orientation_center
- [PreviewDeckN]orientation_center
- [SamplerN]orientation_center
- [AuxiliaryN]orientation_center
Assign channel to the center of the crossfader.
- [ChannelN]orientation_left
- [PreviewDeckN]orientation_left
- [SamplerN]orientation_left
- [AuxiliaryN]orientation_left
Assign channel to the left side of the crossfader.
- [ChannelN]orientation_right
- [PreviewDeckN]orientation_right
- [SamplerN]orientation_right
- [AuxiliaryN]orientation_right
Assign channel to the right side of the crossfader.
- [ChannelN]outro_end_activate
- [PreviewDeckN]outro_end_activate
- [SamplerN]outro_end_activate
If the outro end cue is set, seeks the player to the outro end position. If the outro end is not set, sets the outro end to the current play position.
- Range:
binary
- Feedback:
Player may change position. Outro end marker may change on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]outro_end_clear
- [PreviewDeckN]outro_end_clear
- [SamplerN]outro_end_clear
If the outro end cue is set, clears its status.
- Range:
binary
- Feedback:
Outro end marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]outro_end_enabled
- [PreviewDeckN]outro_end_enabled
- [SamplerN]outro_end_enabled
1 if outro end cue is set, (position is not -1), 0 otherwise.
- Range:
binary, read-only
- Feedback:
Outro end button lights up.
Nové ve verzi 2.3.0.
- [ChannelN]outro_end_position
- [PreviewDeckN]outro_end_position
- [SamplerN]outro_end_position
The position of the outro end in samples, -1 if not set.
- Range:
positive integer
- Feedback:
Outro end marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]outro_end_set
- [PreviewDeckN]outro_end_set
- [SamplerN]outro_end_set
Set outro end to the current play position. If outro end was previously set, it is moved to the new position.
- Range:
binary
- Feedback:
Outro end marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]outro_start_activate
- [PreviewDeckN]outro_start_activate
- [SamplerN]outro_start_activate
If the outro start cue is set, seeks the player to the outro start position. If the outro start is not set, sets the outro start to the current play position.
- Range:
binary
- Feedback:
Player may change position. Outro start marker may change on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]outro_start_clear
- [PreviewDeckN]outro_start_clear
- [SamplerN]outro_start_clear
If the outro start cue is set, clears its status.
- Range:
binary
- Feedback:
Outro start marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]outro_start_enabled
- [PreviewDeckN]outro_start_enabled
- [SamplerN]outro_start_enabled
1 if outro start cue is set, (position is not -1), 0 otherwise.
- Range:
binary, read-only
- Feedback:
Outro start button lights up.
Nové ve verzi 2.3.0.
- [ChannelN]outro_start_position
- [PreviewDeckN]outro_start_position
- [SamplerN]outro_start_position
The position of the outro start in samples, -1 if not set.
- Range:
positive integer
- Feedback:
Outro start marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]outro_start_set
- [PreviewDeckN]outro_start_set
- [SamplerN]outro_start_set
Set outro start to the current play position. If outro start was previously set, it is moved to the new position.
- Range:
binary
- Feedback:
Outro start marker changes on waveform.
Nové ve verzi 2.3.0.
- [ChannelN]passthrough
- [PreviewDeckN]passthrough
- [SamplerN]passthrough
Connects the vinyl control input for vinyl control on that deck to the channel output. Allows to mix external media into DJ sets.
- Range:
binary
- Feedback:
Passthrough label in the waveform overview and passthrough button
Nové ve verzi 2.0.0.
- [ChannelN]PeakIndicator
- [PreviewDeckN]PeakIndicator
- [SamplerN]PeakIndicator
Indicates when the signal is clipping (too loud for the hardware and is being distorted)
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light
- [ChannelN]PeakIndicatorL
- [PreviewDeckN]PeakIndicatorL
- [SamplerN]PeakIndicatorL
Indicates when the signal is clipping (too loud for the hardware and is being distorted) for the left channel
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light (left)
Nové ve verzi 2.0.0.
- [ChannelN]PeakIndicatorR
- [PreviewDeckN]PeakIndicatorR
- [SamplerN]PeakIndicatorR
Indicates when the signal is clipping (too loud for the hardware and is being distorted) for the right channel
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light (right)
Nové ve verzi 2.0.0.
- [ChannelN]pfl
- [PreviewDeckN]pfl
- [SamplerN]pfl
Toggles headphone cueing (PFL).
- Range:
binary
- Feedback:
Headphone button
- [ChannelN]pitch
- [PreviewDeckN]pitch
- [SamplerN]pitch
The total adjustment to the track’s pitch, including changes from the rate slider if keylock is off as well as
pitch_adjust
.Poznámka
Do not map this to knobs or sliders on controllers; map
pitch_adjust
instead.This is a ControlPotMeter control.
- Range:
-6.0..6.0 semitones
- Feedback:
Key display
Nové ve verzi 2.0.0.
- [ChannelN]pitch_up
- [PreviewDeckN]pitch_up
- [SamplerN]pitch_up
Changes the track pitch up one half step, independent of the tempo.
- Range:
binary
- Feedback:
Key display
Nové ve verzi 2.0.0.
- [ChannelN]pitch_down
- [PreviewDeckN]pitch_down
- [SamplerN]pitch_down
Changes the track pitch down one half step, independent of the tempo.
- Range:
binary
- Feedback:
Key display
Nové ve verzi 2.0.0.
- [ChannelN]pitch_adjust
- [PreviewDeckN]pitch_adjust
- [SamplerN]pitch_adjust
Adjusts the pitch in addition to the tempo slider pitch and keylock. It is reset after loading a new track.
This is a ControlPotMeter control.
- Range:
-3.0..3.0 semitones
- Feedback:
Key display
Nové ve verzi 2.0.0.
- [ChannelN]play
- [PreviewDeckN]play
- [SamplerN]play
Toggles playing or pausing the track.
The value is set to 1 when the track is playing or when previewing from cue points and when the play command is adopted and track will be played after loading.
- Range:
binary
- Feedback:
Play/pause button
- [ChannelN]play_indicator
- [PreviewDeckN]play_indicator
- [SamplerN]play_indicator
Provides information to be bound with the a Play/Pause button e.g blinking when play is possible
- Range:
binary, read-only
- Feedback:
Play/pause button
Nové ve verzi 2.0.0.
- [ChannelN]play_latched
- [PreviewDeckN]play_latched
- [SamplerN]play_latched
This is set to 1 when the track is playing, but not when previewing (see
play
).- Range:
binary, read-only
- Feedback:
Play/pause button
Nové ve verzi 2.3.0.
- [ChannelN]play_stutter
- [PreviewDeckN]play_stutter
- [SamplerN]play_stutter
A play button without pause. Pushing while playing, starts play at cue point again (Stutter).
- Range:
binary
- Feedback:
Play/Stutter button
Nové ve verzi 2.0.0.
- [ChannelN]playposition
- [PreviewDeckN]playposition
- [SamplerN]playposition
Sets the absolute position in the track.
This is a ControlPotMeter control.
- Range:
-0.14 to 1.14 (0 = beginning -> Midi 14, 1 = end -> Midi 114)
- Feedback:
Waveform
- [ChannelN]pregain
- [PreviewDeckN]pregain
- [SamplerN]pregain
Adjusts the pre-fader gain of the track (to avoid clipping)
This is a ControlPotMeter control.
- Range:
0.0..1.0..4.0
- Feedback:
GAIN knob
- [ChannelN]quantize
- [PreviewDeckN]quantize
- [SamplerN]quantize
Aligns Hot-cues and Loop In & Out to the next beat from the current position.
- Range:
binary
- Feedback:
Hot-cues or Loop In/Out markers
Nové ve verzi 1.10.0.
- [ChannelN]rate
- [PreviewDeckN]rate
- [SamplerN]rate
Speed control
This is a ControlPotMeter control.
- Range:
-1.0..1.0
- Feedback:
Speed slider
- [ChannelN]rate_dir
- [PreviewDeckN]rate_dir
- [SamplerN]rate_dir
Indicates orientation of speed slider.
- Range:
-1 or 1
- [ChannelN]rate_perm_down
- [PreviewDeckN]rate_perm_down
- [SamplerN]rate_perm_down
Sets the speed one step lower (4 % default) lower
- Range:
binary
- Feedback:
Perm down button & Speed slider
- [ChannelN]rate_perm_down_small
- [PreviewDeckN]rate_perm_down_small
- [SamplerN]rate_perm_down_small
Sets the speed one small step lower (1 % default)
- Range:
binary
- Feedback:
Perm down button & Speed slider
- [ChannelN]rate_perm_up
- [PreviewDeckN]rate_perm_up
- [SamplerN]rate_perm_up
Sets the speed one step higher (4 % default)
- Range:
binary
- Feedback:
Perm up button & Speed slider
- [ChannelN]rate_perm_up_small
- [PreviewDeckN]rate_perm_up_small
- [SamplerN]rate_perm_up_small
Sets the speed one small step higher (1 % default)
- Range:
binary
- Feedback:
Perm up button & Speed slider
- [ChannelN]rate_temp_down
- [PreviewDeckN]rate_temp_down
- [SamplerN]rate_temp_down
Holds the speed one step lower while active
- Range:
binary
- Feedback:
Temp down button & Speed slider
- [ChannelN]rate_temp_down_small
- [PreviewDeckN]rate_temp_down_small
- [SamplerN]rate_temp_down_small
Holds the speed one small step lower while active
- Range:
binary
- Feedback:
Temp down button & Speed slider
- [ChannelN]rate_temp_up
- [PreviewDeckN]rate_temp_up
- [SamplerN]rate_temp_up
Holds the speed one step higher while active
- Range:
binary
- Feedback:
Temp up button & Speed slider
- [ChannelN]rate_temp_up_small
- [PreviewDeckN]rate_temp_up_small
- [SamplerN]rate_temp_up_small
Holds the speed one small step higher while active
- Range:
binary
- Feedback:
Temp up button & Speed slider
- [ChannelN]rateRange
- [PreviewDeckN]rateRange
- [SamplerN]rateRange
Sets the range of the Speed slider (0.08 = 8%)
This is a ControlPotMeter control.
- Range:
0.0..4.0
- Feedback:
none, until you move the Speed slider
- [ChannelN]rateSearch
- [PreviewDeckN]rateSearch
- [SamplerN]rateSearch
Seeks forward (positive values) or backward (negative values) at a speed determined by the value
This is a ControlPotMeter control.
- Range:
-300..300
- Feedback:
Deck seeks
- [ChannelN]rateEngine
- [PreviewDeckN]rateEngine
- [SamplerN]rateEngine
Actual rate (used in visuals, not for control)
- [ChannelN]reloop_andstop
- [PreviewDeckN]reloop_andstop
- [SamplerN]reloop_andstop
Activate current loop, jump to its loop in point, and stop playback.
- Range:
binary
- Feedback:
Loop range in waveform activates or deactivates and play position moves to loop in point.
Nové ve verzi 2.1.0.
- [ChannelN]reloop_toggle
- [PreviewDeckN]reloop_toggle
- [SamplerN]reloop_toggle
Toggles the current loop on or off. If the loop is ahead of the current play position, the track will keep playing normally until it reaches the loop.
- Range:
binary
- Feedback:
Loop range in waveform activates or deactivates.
Nové ve verzi 2.1.0.
- [ChannelN]repeat
- [PreviewDeckN]repeat
- [SamplerN]repeat
Enable repeat-mode for the specified deck
- Range:
binary
- Feedback:
when track finishes, song loops to beginning
Nové ve verzi 1.9.0.
- [ChannelN]reset_key
- [PreviewDeckN]reset_key
- [SamplerN]reset_key
Resets the key to the original track key.
- Range:
binary
Nové ve verzi 2.0.0.
- [ChannelN]reverse
- [PreviewDeckN]reverse
- [SamplerN]reverse
Toggles playing the track backwards
- Range:
binary
- Feedback:
REV button
- [ChannelN]reverseroll
- [PreviewDeckN]reverseroll
- [SamplerN]reverseroll
Enables reverse and slip mode while held (Censor)
- Range:
binary
- Feedback:
REV button
Nové ve verzi 2.0.0.
- [ChannelN]scratch2
- [PreviewDeckN]scratch2
- [SamplerN]scratch2
Affects absolute play speed & direction whether currently playing or not when
[ChannelN],scratch2_enable
is active. (multiplicative). Use JavaScriptengine.scratch
functions to manipulate in controller mappings.- Range:
-3.0..3.0
- Feedback:
Waveform
Nové ve verzi 1.8.0.
- [ChannelN]scratch2_enable
- [PreviewDeckN]scratch2_enable
- [SamplerN]scratch2_enable
Takes over play speed & direction for
[ChannelN],scratch2
.- Range:
binary
- Feedback:
Waveform
Nové ve verzi 1.8.0.
- [ChannelN]slip_enabled
- [PreviewDeckN]slip_enabled
- [SamplerN]slip_enabled
Toggles slip mode. When active, the playback continues muted in the background during a loop, scratch etc. Once disabled, the audible playback will resume where the track would have been.
- Range:
binary
- Feedback:
Slip mode button
Nové ve verzi 1.11.0.
- [ChannelN]stars_up
- [PreviewDeckN]stars_up
- [SamplerN]stars_up
Increase the rating of the currently loaded track (if the skin has star widgets in the decks section).
- Range:
binary
- Feedback:
Star count is increased in the deck’s star widget and in the library table.
Nové ve verzi 2.3.0.
- [ChannelN]stars_down
- [PreviewDeckN]stars_down
- [SamplerN]stars_down
Decrease the rating of the currently loaded track (if the skin has star widgets in the decks section).
- Range:
binary
- Feedback:
Star count is decreased in the deck’s star widget and in the library table.
Nové ve verzi 2.3.0.
- [ChannelN]start
- [PreviewDeckN]start
- [SamplerN]start
Jump to start of track
- Range:
binary
- Feedback:
Track jumps to start
- [ChannelN]start_play
- [PreviewDeckN]start_play
- [SamplerN]start_play
Start playback from the beginning of the deck.
- Range:
binary
- Feedback:
Deck plays from beginning
Nové ve verzi 1.10.0.
- [ChannelN]start_stop
- [PreviewDeckN]start_stop
- [SamplerN]start_stop
Seeks a player to the start and then stops it.
- Range:
binary
- Feedback:
Deck stops at the beginning.
Nové ve verzi 1.10.0.
- [ChannelN]stem_count
The number of stem track available for the loaded file. 0 means the deck is not a STEM deck.
- Range:
0, 2..4, read-only
Nové ve verzi 2.6.0.
- [ChannelNStemM]color
The color for the STEM M on the deck. The first stem color can be retrieved with [ChannelNStem1],color.
- Range:
3-Byte RGB color code (or -1), read-only
Nové ve verzi 2.6.0.
- [ChannelN]stop
- [PreviewDeckN]stop
- [SamplerN]stop
Stops a player.
- Range:
binary
- Feedback:
Pause Button. Deck pauses at the current position.
Nové ve verzi 1.10.0.
- [ChannelN]sync_enabled
- [PreviewDeckN]sync_enabled
- [SamplerN]sync_enabled
Syncs the tempo and phase (depending on quantize) to that of the other track (if BPM is detected on both). Click and hold for at least one second activates sync lock on that deck.
- Range:
binary
- Feedback:
If enabled, the Sync button stays lit and tempo slider snap to the appropriate value. Slider adjustments are linked on all decks that have sync lock enabled.
Nové ve verzi 2.0.0.
- [ChannelN]sync_leader
- [PreviewDeckN]sync_leader
- [SamplerN]sync_leader
Sets deck as leader clock.
- Range:
binary
- Feedback:
If enabled, the Sync button stays lit and tempo slider snap to the appropriate value. Slider adjustments are linked on all decks that have sync lock enabled.
Nové ve verzi 2.4.0.
- [ChannelN]sync_mode
- [PreviewDeckN]sync_mode
- [SamplerN]sync_mode
Nové ve verzi 2.0.0.
- Range:
Value
Meaning
0
Sync lock disabled for that deck
1
Deck is sync follower
2
Deck is sync leader
- [ChannelN]sync_key
- [PreviewDeckN]sync_key
- [SamplerN]sync_key
- Feedback:
Key value widget
Match musical key.
Nové ve verzi 2.0.0.
- [ChannelN]track_color
- [PreviewDeckN]track_color
- [SamplerN]track_color
- [ChannelNStemM]track_color
Color of the currently loaded track or -1 if no track is loaded or the track has no color.
- Range:
3-Byte RGB color code (or -1)
- Feedback:
Track color changes in the library view.
Nové ve verzi 2.3.0.
- [ChannelN]track_loaded
- [PreviewDeckN]track_loaded
- [SamplerN]track_loaded
Whether a track is loaded in the specified deck
- Range:
binary, read-only
- Feedback:
Waveform and track metadata shown in deck
Nové ve verzi 2.1.0.
- [ChannelN]track_samplerate
- [PreviewDeckN]track_samplerate
- [SamplerN]track_samplerate
Sample rate of the track loaded on the specified deck
- Range:
absolute value, read-only
- Feedback:
None
Nové ve verzi 1.9.0.
- [ChannelN]track_samples
- [PreviewDeckN]track_samples
- [SamplerN]track_samples
Number of sound samples in the track loaded on the specified deck
- Range:
absolute value, read-only
- Feedback:
None
- [ChannelN]volume
- [PreviewDeckN]volume
- [SamplerN]volume
- [ChannelNStemM]volume
Adjusts the channel volume fader
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Deck volume fader
- [ChannelN]mute
- [PreviewDeckN]mute
- [SamplerN]mute
- [ChannelNStemM]mute
Mutes the channel
- Range:
binary
- Feedback:
Mute button
Nové ve verzi 2.0.0.
- [ChannelN]update_replaygain_from_pregain
- [PreviewDeckN]update_replaygain_from_pregain
- [SamplerN]update_replaygain_from_pregain
Applies the deck pregain knob value to the detected ReplayGain value for the current track. This is a way to update the ReplayGain value of a track if it has been detected incorrectly. When this control is triggered, the pregain value for the deck will be centered so that there is no audible difference in track volume, so this operation is safe to use during performance, if the controller mapping uses soft-takeover for the pregain knob.
- Range:
binary
- Feedback:
ReplayGain value is updated in library, deck pregain is reset to 1.0.
- [ChannelN]vinylcontrol_enabled
- [PreviewDeckN]vinylcontrol_enabled
- [SamplerN]vinylcontrol_enabled
Toggles whether a deck is being controlled by digital vinyl.
- Range:
binary
- Feedback:
When enabled, a vinyl indication should appear onscreen indicating green for enabled.
Nové ve verzi 1.10.0.
- [ChannelN]vinylcontrol_cueing
- [PreviewDeckN]vinylcontrol_cueing
- [SamplerN]vinylcontrol_cueing
Determines how cue points are treated in vinyl control relative mode.
- Range:
Value
Meaning
0
Cue points ignored
1
One Cue - If needle is dropped after the cue point, track will seek to that cue point
2
Hot Cue - Track will seek to nearest previous hotcue
Nové ve verzi 1.10.0.
- [ChannelN]vinylcontrol_mode
- [PreviewDeckN]vinylcontrol_mode
- [SamplerN]vinylcontrol_mode
Determines how vinyl control interprets needle information.
- Range:
Value
Meaning
0
Absolute Mode (track position equals needle position and speed)
1
Relative Mode (track tempo equals needle speed regardless of needle position)
2
Constant Mode (track tempo equals last known-steady tempo regardless of needle input
See Control Mode for details.
- Feedback:
3-way button indicates status
Nové ve verzi 1.10.0.
- [ChannelN]vinylcontrol_status
- [PreviewDeckN]vinylcontrol_status
- [SamplerN]vinylcontrol_status
Provides visual feedback with regards to vinyl control status.
- Range:
0.0-3.0, read-only
- Feedback:
Off for control disabled, green for control enabled, blinking yellow for when the needle reaches the end of the record, and red for needle skip detected
Nové ve verzi 1.10.0.
- [ChannelN]visual_bpm
- [PreviewDeckN]visual_bpm
- [SamplerN]visual_bpm
BPM to display in the GUI (updated more slowly than the actual BPM).
- Range:
?
- Feedback:
BPM value widget
Nové ve verzi 2.0.0.
- [ChannelN]visual_key
- [PreviewDeckN]visual_key
- [SamplerN]visual_key
Current musical key after pitch shifting to display in the GUI using the notation selected in the preferences
- Range:
?
- Feedback:
Key value widget
Nové ve verzi 2.0.0.
- [ChannelN]visual_key_distance
- [PreviewDeckN]visual_key_distance
- [SamplerN]visual_key_distance
The distance to the nearest key measured in cents
This is a ControlPotMeter control.
- Range:
-0.5..0.5
- Feedback:
Key value widget
Nové ve verzi 2.0.0.
- [ChannelN]VuMeter
- [PreviewDeckN]VuMeter
- [SamplerN]VuMeter
Outputs the current instantaneous deck volume
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Deck VU meter
- [ChannelN]VuMeterL
- [PreviewDeckN]VuMeterL
- [SamplerN]VuMeterL
Outputs the current instantaneous deck volume for the left channel
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Deck VU meter L
- [ChannelN]VuMeterR
- [PreviewDeckN]VuMeterR
- [SamplerN]VuMeterR
Outputs the current instantaneous deck volume for the right channel
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Deck VU meter R
- [ChannelN]waveform_zoom
- [PreviewDeckN]waveform_zoom
- [SamplerN]waveform_zoom
Zooms the waveform to look ahead or back as needed.
- Range:
1.0 - 10.0
- Feedback:
Waveform zoom buttons
Nové ve verzi 1.11.0.
- [ChannelN]waveform_zoom_up
- [PreviewDeckN]waveform_zoom_up
- [SamplerN]waveform_zoom_up
Waveform Zoom Out
- Range:
?
- Feedback:
Waveform zoom buttons
Nové ve verzi 1.11.0.
- [ChannelN]waveform_zoom_down
- [PreviewDeckN]waveform_zoom_down
- [SamplerN]waveform_zoom_down
Waveform Zoom In
- Range:
?
- Feedback:
Waveform zoom buttons
Nové ve verzi 1.11.0.
- [ChannelN]waveform_zoom_set_default
- [PreviewDeckN]waveform_zoom_set_default
- [SamplerN]waveform_zoom_set_default
Return to default waveform zoom level
- Range:
?
- Feedback:
Waveform zoom buttons
Nové ve verzi 1.11.0.
- [ChannelN]wheel
- [PreviewDeckN]wheel
- [SamplerN]wheel
Affects relative playback speed and direction persistently (additive offset & must manually be undone).
- Range:
-3.0..3.0
- Feedback:
Waveform
Global Sampler controls
These controls can be used to control all samplers.
- [Sampler]SaveSamplerBank
Save sampler configuration. Make currently loaded tracks in samplers instantly available at a later point.
- Range:
binary
- Feedback:
Opens file dialog. Configuration file can be named and saved.
Nové ve verzi 2.0.0.
- [Sampler]LoadSamplerBank
Load saved sampler configuration file and add tracks to the available samplers.
- Range:
binary
- Feedback:
Opens file dialog. Select configuration file.
Nové ve verzi 2.0.0.
Viz také
The [Skin],show_samplers
control can be used to show and hide sampler banks in the GUI.
Microphones and Auxiliary Channels
In contrast to decks, preview decks and samplers, microphones and auxiliary channels are input channels. You can map audio interface’s inputs to mixxx’s auxiliary input channels and connect external audio source to it (cellphone, mp3 player). Then you can use your MIDI controller to control its volume and some other parameters (orientation, gain, volume), apply effects and use the prelisten function.
Poznámka
Although the first auxiliary group is named [Auxiliary1]
, the group for the first microphone is just called [Microphone]
, not [Microphone1]
.
- [MicrophoneN]input_configured
- [AuxiliaryN]input_configured
1 if there is input is configured for this channel, 0 if not.
- Range:
binary, read-only
- Feedback:
Configured channel in the sound preferences.
- [MicrophoneN]main_mix
- [AuxiliaryN]main_mix
Hold value at 1 to mix channel input into the main output. For
[MicrophoneN]
use[MicrophoneN],talkover
instead. Note that[AuxiliaryN]
also take[AuxiliaryN],orientation
into account.- Range:
binary
- Feedback:
Auxiliary: Play button Microphone: N/A
- [AuxiliaryN]orientation
Set channel orientation for the crossfader.
- Range:
Value
Meaning
0
Left side of crossfader
1
Center (not affected by crossfader)
2
Right side of crossfader
- Feedback:
None
Nové ve verzi 1.10.0.
- [MicrophoneN]PeakIndicator
- [AuxiliaryN]PeakIndicator
Indicates when the signal is clipping (too loud for the hardware and is being distorted)
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Microphone Clip light
Nové ve verzi 1.10.0.
- [MicrophoneN]PeakIndicatorL
- [AuxiliaryN]PeakIndicatorL
Indicates when the signal is clipping (too loud for the hardware and is being distorted) for the left channel
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light (left)
Nové ve verzi 2.0.0.
- [MicrophoneN]PeakIndicatorR
- [AuxiliaryN]PeakIndicatorR
Indicates when the signal is clipping (too loud for the hardware and is being distorted) for the right channel
This is a ControlPotMeter control.
- Range:
binary
- Feedback:
Clip light (right)
Nové ve verzi 2.0.0.
- [MicrophoneN]pfl
- [AuxiliaryN]pfl
Toggles headphone cueing (PFL).
- Range:
binary
- Feedback:
Headphone button
- [MicrophoneN]talkover
- [AuxiliaryN]talkover
Hold value at 1 to mix channel input into the main output. For
[AuxiliaryN]
use[AuxiliaryN],main_mix
instead. Note that[AuxiliaryN]
also take[AuxiliaryN],orientation
into account.- Range:
binary
- Feedback:
Microphone: Talk button Auxiliary: N/A
Nové ve verzi 1.10.0.
- [MicrophoneN]volume
- [AuxiliaryN]volume
Adjusts the channel volume fader
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Microphone volume fader changes
Nové ve verzi 1.10.0.
- [MicrophoneN]pregain
- [AuxiliaryN]pregain
Adjusts the gain of the input
This is a ControlPotMeter control.
- Range:
0.0..1.0..4.0
- Feedback:
Microphone gain knob
- [MicrophoneN]mute
- [AuxiliaryN]mute
Mutes the channel
- Range:
binary
- Feedback:
Mute button
Nové ve verzi 2.0.0.
- [MicrophoneN]VuMeter
- [AuxiliaryN]VuMeter
Outputs the current instantaneous channel volume
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Microphone VU meter changes
Nové ve verzi 1.10.0.
- [MicrophoneN]VuMeterL
- [AuxiliaryN]VuMeterL
Outputs the current instantaneous deck volume for the left channel
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Deck VU meter L
Nové ve verzi 2.0.0.
- [MicrophoneN]VuMeterR
- [AuxiliaryN]VuMeterR
Outputs the current instantaneous deck volume for the right channel
This is a ControlPotMeter control.
- Range:
default
- Feedback:
Deck VU meter R
Nové ve verzi 2.0.0.
The [VinylControl]
group
The [VinylControl]
group can toggle the vinyl control feature.
- [VinylControl]Toggle
Moves control by a vinyl control signal from one deck to another if using the single deck vinyl control (VC) feature.
- Range:
binary
- Feedback:
If VC isn’t enabled on any decks, enable it on the first one we’re receiving samples for. If VC is enabled on a single (exclusive) deck, and another deck is setup to receive samples, disable it on the former deck and enable it on the next eligible deck (ordered by deck number). If VC is enabled on multiple decks, don’t do anything.
Nové ve verzi 1.10.0.
- [VinylControl]gain
Allows to amplify the „phono“ level of attached turntables to „line“ level. This is equivalent to setting the turntable boost in
- Range:
binary
- Feedback:
position of Boost slider in
(is not updated while viewing this Preferences page)
Nové ve verzi 1.10.0.
Viz také
The [Skin],show_vinylcontrol
control can be used to show and hide vinyl control related elements in the GUI.
The [Recording]
controls
The controls in the [Recording]
group can be used to query and control the recording of your mix.
- [Recording]toggle_recording
Turns recording on or off.
- Range:
binary
- Feedback:
Recording icon
- [Recording]status
Indicates whether Mixxx is currently recording.
- Range:
Value
Meaning
0
Recording Stopped
1
Initialize Recording
2
Recording Active
- Feedback:
Recording icon
AutoDJ controls
The [AutoDJ]
controls allow interacting with AutoDJ.
- [AutoDJ]enabled
Turns Auto DJ on or off.
- Range:
binary
- Feedback:
AutoDJ button
Nové ve verzi 1.11.0.
- [AutoDJ]shuffle_playlist
Shuffles the content of the Auto DJ playlist.
- Range:
binary
- Feedback:
Order of tracks in the AutoDJ playlist changes.
Nové ve verzi 1.11.0.
- [AutoDJ]skip_next
Skips the next track in the Auto DJ playlist.
- Range:
binary
- Feedback:
Skipped track is removed from the AutoDJ playlist.
Nové ve verzi 1.11.0.
- [AutoDJ]fade_now
Triggers the transition to the next track.
- Range:
binary
- Feedback:
Crossfader slider moves to the other side.
Nové ve verzi 1.11.0.
- [AutoDJ]add_random_track
Adds a random track to the Auto DJ queue.
- Range:
binary
- Feedback:
Track is added to AutoDJ queue.
Nové ve verzi 2.4.0.
The [Library]
controls
The controls in the [Library]
group can be used to navigate the library.
Note that [Library],MoveUp
and other Move and Scroll controls emulate keypresses and therefore require the Mixxx window to be focused.
- [Library]MoveUp
Equivalent to pressing the Up key on the keyboard
- Range:
Binary
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]MoveDown
Equivalent to pressing the Down key on the keyboard
- Range:
Binary
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]MoveVertical
Move the specified number of locations up or down. Intended to be mapped to an encoder knob.
- Range:
Relative (positive values move down, negative values move up)
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]ScrollUp
Equivalent to pressing the PageUp key on the keyboard
- Range:
Binary
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]ScrollDown
Equivalent to pressing the PageDown key on the keyboard
- Range:
Binary
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]ScrollVertical
Scroll the specified number of pages up or down. Intended to be mapped to an encoder knob.
- Range:
Relative (positive values move down, negative values move up)
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]MoveLeft
Equivalent to pressing the Left key on the keyboard
- Range:
Binary
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]MoveRight
Equivalent to pressing the Right key on the keyboard
- Range:
Binary
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]MoveHorizontal
Move the specified number of locations left or right. Intended to be mapped to an encoder knob.
- Range:
Relative (positive values move right, negative values move left)
- Feedback:
Currently selected item changes
Nové ve verzi 2.1.0.
- [Library]MoveFocusForward
Equivalent to pressing the Tab key on the keyboard
- Range:
Binary
- Feedback:
Currently focused pane changes
Nové ve verzi 2.1.0.
- [Library]MoveFocusBackward
Equivalent to pressing the Shift + Tab key on the keyboard
- Range:
Binary
- Feedback:
Currently focused pane changes
Nové ve verzi 2.1.0.
- [Library]MoveFocus
Move focus the specified number of panes forward or backwards. Intended to be mapped to an encoder knob.
- Range:
Relative (positive values move forward, negative values move backward)
- Feedback:
Currently focused pane changes
Nové ve verzi 2.1.0.
- [Library]focused_widget
Read this control to know which library widget is currently focused, or write in order to focus a specific library widget.
This control can be used in controller scripts to trigger context-specific actions. For example, if the tracks table has focus, pressing a button loads the selected track to a specific deck, while the same button would clear the search if the search bar is focused.
Note: This control is useful only if a Mixxx window has keyboard focus, otherwise it always returns 0.
- Range:
Value
writeable
Widget
0
none
1
X
Search bar
2
X
Tree view
3
X
Tracks table or root views of library features
4
Context menu (menus of library widgets or other editable widgets, or main menu bar)
5
Dialog (any confirmation or error popup, preferences, track properties or cover art window)
6
Unknown (widgets that don’t fit into any of the above categories)
- Feedback:
Currently focused widget changes
Nové ve verzi 2.4.0.
- [Library]GoToItem
Triggers different actions, depending on which interface element currently has keyboard focus:
Search bar
text box
moves focus to tracks table
Clear button
clears search text
Sidebar
collapsed node
expands the item (except Tracks and Auto DJ)
leaf node
moves focus to tracks table
Tracks table
Performs the action selected in
(default is „Load selected track“). Also seeContext menus
presses Enter
Dialogs / popups
presses Enter. Note: the
Move..
controls allow to move button focus.- Range:
Binary
- Feedback:
Context dependent
Nové ve verzi 2.1.0.
Toggle the track context menu for all tracks selected in the current library view. The control value is 1 if there is already a menu shown for the current view. Note that the control is not aware of other track menus, for example those opened by right-clicking track text labels in decks. Only the most recent menu can be navigated with the
MoveUp/Down
controls.- Range:
Binary
- Feedback:
Tracks table context menu is shown or hidden.
Nové ve verzi 2.4.0.
- [Library]AutoDjAddBottom
- [Playlist]AutoDjAddBottom
Add selected track(s) to Auto DJ Queue (bottom).
- Range:
Binary
- Feedback:
Append track(s) to Auto DJ playlist
Nové ve verzi 2.0.0.
- [Library]AutoDjAddTop
- [Playlist]AutoDjAddTop
Add selected track(s) to Auto DJ Queue (top).
- Range:
Binary
- Feedback:
Prepend track(s) to Auto DJ playlist
Nové ve verzi 2.0.0.
- [Library]font_size_increment
Increase the size of the library font. If the row height is smaller than the font-size the larger of the two is used.
- Range:
Binary
- Feedback:
Library view
Nové ve verzi 2.0.0.
- [Library]font_size_decrement
Decrease the size of the library font
Nové ve verzi 2.0.0.
- Range:
Binary
- Feedback:
Library view
- [Library]font_size_knob
Increase or decrease the size of the library font
Nové ve verzi 2.0.0.
- Range:
Relative
- Feedback:
Library view
- [Library]sort_column
Indicates the sorting column the track table
- Range:
Value
Description
Library
Playlist
Crate
Browse
1
Artist
X
X
X
X
2
Title
X
X
X
X
3
Album
X
X
X
X
4
Albumartist
X
X
X
X
5
Year
X
X
X
X
6
Genre
X
X
X
X
7
Composer
X
X
X
X
8
Grouping
X
X
X
X
9
Tracknumber
X
X
X
X
10
Filetype
X
X
X
X
11
Native Location
X
X
X
X
12
Comment
X
X
X
X
13
Duration
X
X
X
X
14
Bitrate
X
X
X
X
15
BPM
X
X
X
X
16
ReplayGain
X
X
X
X
17
Datetime Added
X
X
X
X
18
Times Played
X
X
X
X
19
Rating
X
X
X
X
20
Key
X
X
X
X
21
Preview
X
X
X
X
22
Coverart
X
X
X
23
Position
X
24
Playlist ID
X
25
Location
X
26
Filename
X
27
File Modified Time
X
28
File Creation Time
X
29
Sample Rate
30
Track Color
X
X
X
31
Last Played
X
X
X
- Feedback:
Sorting indicator in the column headers of the track table
Nové ve verzi 2.3.0.
- [Library]sort_column_toggle
Equivalent to clicking on column headers. A new value sets
[Library],sort_column
to that value and[Library],sort_order
to 0, setting the same value again will toggle[Library],sort_order
.- Range:
Same as for
[Library],sort_column
or value 0 for sorting according the current column with the cursor on it- Feedback:
Sorting indicator in the column headers of the track table
Nové ve verzi 2.3.0.
- [Library]sort_order
Indicate the sort order of the track tables.
- Range:
Binary (0 for ascending, 1 for descending)
- Feedback:
Sorting indicator in the column headers of the track table
Nové ve verzi 2.3.0.
- [Library]sort_focused_column
Sort the column of the table cell that is currently focused, which is equivalent to setting
[Library],sort_column_toggle
to 0. Though unlike that, it can be mapped to pushbuttons directly.- Range:
Binary
- Feedback:
Sorting indicator in the column headers of the track table
Nové ve verzi 2.4.0.
- [Library]track_color_prev
Set color of selected track to previous color in palette.
- Range:
Binary
- Feedback:
Track color changes in the library view.
Nové ve verzi 2.3.0.
- [Library]track_color_next
Set color of selected track to next color in palette.
- Range:
Binary
- Feedback:
Track color changes in the library view.
Nové ve verzi 2.3.0.
- [Library]search_history_next
Select the next saved search query. Wraps around at the last item to the empty search.
- Range:
Binary
- Feedback:
Searchbox query changes
Nové ve verzi 2.4.0.
- [Library]search_history_prev
Select the previous saved search query. Wraps around at the top to the last item.
- Range:
Binary
- Feedback:
Searchbox query changes
Nové ve verzi 2.4.0.
- [Library]search_history_selector
Select another saved search query. < 0 goes up the list, > 0 goes down. Wraps around at the top and bottom.
- Range:
-N / +N
- Feedback:
Searchbox query changes
Nové ve verzi 2.4.0.
- [Library]clear_search
Clear the search.
- Range:
Binary
- Feedback:
Searchbox query is cleared
Nové ve verzi 2.4.0.
Viz také
The library section in the GUI can be enlarged by using the [Skin],show_maximized_library
control.
The [Skin],show_library_coverart
control can be used to toggle the display of library coverart.
The [Shoutcast]
controls
- [Shoutcast]enabled
Shows if live Internet broadcasting is enabled.
- Range:
?
- Feedback:
shoutcast only supports mp3 format as field
- [Shoutcast]status
This control displays whether broadcasting connection to Shoutcast server was successfully established.
- Range:
binary
- Feedback:
None
The [Playlist]
controls
[Playlist]
controls allow navigating the sidebar and tracks table directly without considering
the currently focused widget. This is helpful when another application’s window is focused.
This group is going to be deprecated at some point, with its controls added to [Library]
above.
Viz také
See bug #1772184 for the current status.
- [Playlist]SelectPlaylist
Scrolls the given number of items (view, playlist, crate, etc.) in the side pane (can be negative for reverse direction).
- Range:
relative value
- Feedback:
Library sidebar highlight
- [Playlist]SelectTrackKnob
Scrolls the given number of tracks in the track table (can be negative for reverse direction).
- Range:
relative value
- Feedback:
Library track table highlight
The [Controls]
controls
The [Controls]
group contains controls that didn’t fit in any other group.
- [Controls]touch_shift
Once enabled, all touch tab events are interpreted as right click. This control has been added to provide touchscreen compatibility in 2.0 and might be replaced by a general modifier solution in the future.
- Range:
binary
- Feedback:
All Widgets
Nové ve verzi 2.0.0.
- [Controls]AutoHotcueColors
If enabled, colors will be assigned to newly created hotcues automatically.
- Range:
binary
- Feedback:
None
Nové ve verzi 2.3.0.
- [Controls]ShowDurationRemaining
Represents the current state of the remaining time duration display of the loaded track.
- Range:
Value
Meaning
0
currently showing elapsed time, sets to remaining time
1
currently showing remaining time , sets to elapsed time
2
currently showing both (that means we are showing remaining, set to elapsed
- Feedback:
None
The Effects Framework
In the list below,
EffectRack1 leaves room for future expansion to multiple EffectRacks.
N ranges from 1 to
[EffectRack1],num_effectunits
, inclusive.M ranges from 1 to
[EffectRack1_EffectUnitN],num_effectslots
, inclusive. (For a given value of N)K ranges from 1 to
[EffectRack1_EffectUnitN_EffectM],num_parameters
, inclusive. (For given values of N and M)I ranges from 1 to
[App],num_decks
, inclusive.J ranges from 1 to
[App],num_samplers
, inclusive.
Nové ve verzi 2.0.0.
Linking Values
Effect parameters can be linked to the effect’s metaknob.
This linkage can be user-controlled by changing the link_type
and the link_inverse
control of the parameter.
The default link type is loaded from the effect parameter’s manifest’s linkHint
property.
Link Type |
Integer Value |
Interpretation |
---|---|---|
None |
0 |
Not controlled by the metaknob |
Linked |
1 |
Controlled by the metaknob as it is |
Linked Left |
2 |
Controlled by the left side of the metaknob |
Linked Right |
3 |
Controlled by the right side of the metaknob |
Linked Left Right |
4 |
Controlled by both sides of the metaknob |
Link Inverse |
Integer Value |
Interpretation |
---|---|---|
Normal |
0 |
Linked in equal relation |
Inverse |
1 |
Linked in an inverse relation. |
EQs and Filters
Equalizers and filters are special effects units.
The EQs are controlled by [EqualizerRack1_[ChannelI]_Effect1]
and the filter knob is controlled by [QuickEffectRack1_[ChannelI]],super1
and [QuickEffectRack1_[ChannelI]_Effect1],enabled
.
Users can choose between several options for the effects loaded in these racks in the Equalizers section of the Preferences window.
Controls
- [EffectRack1]num_effectunits
- [EqualizerRack1]num_effectunits
- [QuickEffectRack1]num_effectunits
The number of EffectUnits in this rack
- Range:
integer, read-only
- [EffectRack1_EffectUnitN]chain_preset_selector
- [EqualizerRack1_[ChannelI]]chain_preset_selector
- [QuickEffectRack1_[ChannelI]]chain_preset_selector
Select EffectChain preset. > 0 goes one forward; < 0 goes one backward.
- Range:
+1/-1
- [EffectRack1_EffectUnitN]clear
- [EqualizerRack1_[ChannelI]]clear
- [QuickEffectRack1_[ChannelI]]clear
Clear the currently loaded EffectChain in this EffectUnit.
- Range:
binary
- [EffectRack1_EffectUnitN]enabled
- [EqualizerRack1_[ChannelI]]enabled
- [QuickEffectRack1_[ChannelI]]enabled
If true, the EffectChain in this EffectUnit will be processed. Meant to allow the user a quick toggle for the effect unit.
- Range:
binary, default true
- [EffectRack1_EffectUnitN]focused_effect
- [EqualizerRack1_[ChannelI]]focused_effect
- [QuickEffectRack1_[ChannelI]]focused_effect
0 indicates no effect is focused; > 0 indicates the index of the focused effect. Focusing an effect only does something if a controller mapping changes how it behaves when an effect is focused.
- Range:
0..num_effectslots
- [EffectRack1_EffectUnitN]group_[ChannelI]_enable
- [EqualizerRack1_[ChannelI]]group_[ChannelI]_enable
- [QuickEffectRack1_[ChannelI]]group_[ChannelI]_enable
Whether or not this EffectChain applies to Deck I
- Range:
binary
- [EffectRack1_EffectUnitN]group_[Headphone]_enable
Whether or not this EffectChain applies to the Headphone output
- Range:
binary
- [EffectRack1_EffectUnitN]group_[Master]_enable
Whether or not this EffectChain applies to the Main output
- Range:
binary
- [EffectRack1_EffectUnitN]group_[SamplerJ]_enable
Whether or not this EffectChain applies to Sampler J
- Range:
binary
- [EffectRack1_EffectUnitN]loaded
- [EqualizerRack1_[ChannelI]]loaded
- [QuickEffectRack1_[ChannelI]]loaded
Whether an EffectChain is loaded into the EffectUnit
- Range:
binary, read-only
- [EffectRack1_EffectUnitN]loaded_chain_preset
- [EqualizerRack1_[ChannelI]]loaded_chain_preset
- [QuickEffectRack1_[ChannelI]]loaded_chain_preset
0-based index of the currently loaded EffectChain preset. 0 is the empty/passthrough preset, -1 indicates an unsaved preset (default state of [EffectRack1_EffectUnitN]).
- Range:
integer, -1 .. [
num_chain_presets
- 1]
- [EffectRack1_EffectUnitN]mix
- [EqualizerRack1_[ChannelI]]mix
- [QuickEffectRack1_[ChannelI]]mix
The dry/wet mixing ratio for this EffectChain with the EngineChannels it is mixed with
This is a ControlPotMeter control.
- Range:
0.0..1.0
- [EffectRack1_EffectUnitN]next_chain_preset
- [EqualizerRack1_[ChannelI]]next_chain_preset
- [QuickEffectRack1_[ChannelI]]next_chain_preset
Cycle to the next EffectChain preset after the currently loaded preset.
- Range:
binary
- [EffectRack1_EffectUnitN]num_chain_presets
- [EqualizerRack1_[ChannelI]]num_chain_presets
- [QuickEffectRack1_[ChannelI]]num_chain_presets
The number of effect chain presets available in this EffectUnit, including the empty/passthrough preset „---“.
- Range:
integer, read-only, >=1
- [EffectRack1_EffectUnitN]num_effectslots
- [EqualizerRack1_[ChannelI]]num_effectslots
- [QuickEffectRack1_[ChannelI]]num_effectslots
The number of effect slots available in this EffectUnit.
- Range:
integer, read-only
- [EffectRack1_EffectUnitN]prev_chain_preset
- [EqualizerRack1_[ChannelI]]prev_chain_preset
- [QuickEffectRack1_[ChannelI]]prev_chain_preset
Cycle to the previous EffectChain preset before the currently loaded preset.
- Range:
binary
- [EffectRack1_EffectUnitN]show_focus
- [EqualizerRack1_[ChannelI]]show_focus
- [QuickEffectRack1_[ChannelI]]show_focus
Whether to show focus buttons and draw a border around the focused effect in skins. This should not be manipulated by skins; it should only be changed by controller mappings.
- Range:
binary
- [EffectRack1_EffectUnitN]show_parameters
- [EqualizerRack1_[ChannelI]]show_parameters
- [QuickEffectRack1_[ChannelI]]show_parameters
- Range:
binary
Whether to show all the parameters of each effect in skins or only show metaknobs.
- [EffectRack1_EffectUnitN]super1
- [EqualizerRack1_[ChannelI]]super1
- [QuickEffectRack1_[ChannelI]]super1
The EffectChain superknob. Moves the metaknobs for each effect in the chain.
This is a ControlPotMeter control.
- Range:
0.0..1.0
- [EffectRack1_EffectUnitN_EffectM]clear
- [EqualizerRack1_[ChannelI]_Effect1]clear
- [QuickEffectRack1_[ChannelI]_Effect1]clear
Clear the currently loaded Effect in this Effect slot from the EffectUnit.
- Range:
binary
- [EffectRack1_EffectUnitN_EffectM]effect_selector
- [EqualizerRack1_[ChannelI]_Effect1]effect_selector
- [QuickEffectRack1_[ChannelI]_Effect1]effect_selector
Select Effect – >0 goes one forward, <0 goes one backward.
- Range:
+1/-1
- [EffectRack1_EffectUnitN_EffectM]enabled
- [EqualizerRack1_[ChannelI]_Effect1]enabled
- [QuickEffectRack1_[ChannelI]_Effect1]enabled
If true, the effect in this slot will be processed. Meant to allow the user a quick toggle for this effect.
- Range:
binary, default true
- [EffectRack1_EffectUnitN_EffectM]loaded
- [EqualizerRack1_[ChannelI]_Effect1]loaded
- [QuickEffectRack1_[ChannelI]_Effect1]loaded
Whether an Effect is loaded into this EffectSlot
- Range:
binary, read-only
- [EffectRack1_EffectUnitN_EffectM]loaded_effect
- [EqualizerRack1_[ChannelI]_Effect1]loaded_effect
- [QuickEffectRack1_[ChannelI]_Effect1]loaded_effect
0-based index of the currently loaded effect preset, including the empty/passthrough preset „---“.
- Range:
integer, 0 .. [
num_effectsavailable
- 1]
- [EffectRack1_EffectUnitN_EffectM]next_effect
- [EqualizerRack1_[ChannelI]_Effect1]next_effect
- [QuickEffectRack1_[ChannelI]_Effect1]next_effect
Cycle to the next effect after the currently loaded effect.
- Range:
binary
- [EffectRack1_EffectUnitN_EffectM]num_parameters
- [EqualizerRack1_[ChannelI]_Effect1]num_parameters
- [QuickEffectRack1_[ChannelI]_Effect1]num_parameters
The number of parameters the currently loaded effect has.
- Range:
integer, read-only, 0 if no effect is loaded
- [EffectRack1_EffectUnitN_EffectM]num_parameterslots
- [EqualizerRack1_[ChannelI]_Effect1]num_parameterslots
- [QuickEffectRack1_[ChannelI]_Effect1]num_parameterslots
The number of parameter slots available.
- Range:
integer, read-only
- [EffectRack1_EffectUnitN_EffectM]num_button_parameters
- [EqualizerRack1_[ChannelI]_Effect1]num_button_parameters
- [QuickEffectRack1_[ChannelI]_Effect1]num_button_parameters
The number of button parameters the currently loaded effect has.
- Range:
integer, read-only, 0 if no effect is loaded
- [EffectRack1_EffectUnitN_EffectM]num_button_parameterslots
- [EqualizerRack1_[ChannelI]_Effect1]num_button_parameterslots
- [QuickEffectRack1_[ChannelI]_Effect1]num_button_parameterslots
The number of button parameter slots available.
- Range:
integer, read-only
- [EffectRack1_EffectUnitN_EffectM]meta
- [EqualizerRack1_[ChannelI]_Effect1]meta
- [QuickEffectRack1_[ChannelI]_Effect1]meta
Controls the parameters that are linked to the metaknob.
This is a ControlPotMeter control.
- Range:
0..1
- [EffectRack1_EffectUnitN_EffectM]prev_effect
- [EqualizerRack1_[ChannelI]_Effect1]prev_effect
- [QuickEffectRack1_[ChannelI]_Effect1]prev_effect
Cycle to the previous effect before the currently loaded effect.
- Range:
binary
- [EffectRack1_EffectUnitN_EffectM]parameterK
- [EqualizerRack1_[ChannelI]_Effect1]parameterK
- [QuickEffectRack1_[ChannelI]_Effect1]parameterK
The scaled value of the Kth parameter. See the Parameter Values section for more information.
This is a ControlPotMeter control.
- Range:
double
- [EffectRack1_EffectUnitN_EffectM]parameterK_link_inverse
- [EqualizerRack1_[ChannelI]_Effect1]parameterK_link_inverse
- [QuickEffectRack1_[ChannelI]_Effect1]parameterK_link_inverse
The link direction of the Kth parameter to the effect’s metaknob.
- Range:
bool
- [EffectRack1_EffectUnitN_EffectM]parameterK_link_type
- [EqualizerRack1_[ChannelI]_Effect1]parameterK_link_type
- [QuickEffectRack1_[ChannelI]_Effect1]parameterK_link_type
The link type of the Kth parameter to the effects’s metaknob.
- Range:
enum
- [EffectRack1_EffectUnitN_EffectM]parameterK_loaded
- [EqualizerRack1_[ChannelI]_Effect1]parameterK_loaded
- [QuickEffectRack1_[ChannelI]_Effect1]parameterK_loaded
Whether or not the Kth parameter slot has an effect parameter loaded into it.
- Range:
binary, read-only
- [EffectRack1_EffectUnitN_EffectM]parameterK_type
- [EqualizerRack1_[ChannelI]_Effect1]parameterK_type
- [QuickEffectRack1_[ChannelI]_Effect1]parameterK_type
The type of the Kth parameter value. See the Parameter Value Types table.
- Range:
integer, read-only
- [EffectRack1_EffectUnitN_EffectM]button_parameterK
- [EqualizerRack1_[ChannelI]_Effect1]button_parameterK
- [QuickEffectRack1_[ChannelI]_Effect1]button_parameterK
The value of the Kth parameter. See the Parameter Values section for more information.
- Range:
double
- [EffectRack1_EffectUnitN_EffectM]button_parameterK_loaded
- [EqualizerRack1_[ChannelI]_Effect1]button_parameterK_loaded
- [QuickEffectRack1_[ChannelI]_Effect1]button_parameterK_loaded
Whether or not the Kth parameter slot has an effect parameter loaded into it.
- Range:
binary, read-only
- [EffectRack1_EffectUnitN_EffectM]button_parameterK_type
- [EqualizerRack1_[ChannelI]_Effect1]button_parameterK_type
- [QuickEffectRack1_[ChannelI]_Effect1]button_parameterK_type
The type of the Kth parameter value. See the Parameter Value Types table.
- Range:
integer, read-only
Viz také
The [EffectRack1],show
control can be used to show and hide the effect section in the GUI.
The [Skin]
group
The [Skin]
group contains controls that are used to selective show and hide parts of the graphical user interface of Mixxx to suit your needs.
Poznámka
Some skins may not support some or all of these controls. In this case, triggering the unsupported control will do nothing.
- [Skin]show_effectrack
Toggle the display of the effect rack in the user interface.
- Range:
binary
- Feedback:
Effect rack is shown/hidden.
Nové ve verzi 2.4.0: Replaces the deprecated
[EffectRack1],show
control.
- [Skin]show_library_coverart
Toggle the display of cover art in the library section of the user interface.
- Range:
binary
- Feedback:
Cover art in the library is shown/hidden.
Nové ve verzi 2.4.0: Replaces the deprecated
[Library],show_coverart
control.
- [Skin]show_maximized_library
Toggle maximized view of library section of the user interface.
- Range:
binary
- Feedback:
The library section of the user interface is enlarged/shrunk.
Nové ve verzi 2.4.0: Replaces the deprecated
[Master],maximize_library
control.
- [Skin]show_samplers
Toggle the display of sampler banks in the user interface.
- Range:
binary
- Feedback:
Sampler banks are shown/hidden.
Nové ve verzi 2.4.0: Replaces the deprecated
[Samplers],show_samplers
control.
- [Skin]show_vinylcontrol
Toggle the vinyl control section in the user interface.
- Range:
binary
- Feedback:
Vinyl controls are shown/hidden.
Nové ve verzi 2.4.0: Replaces the deprecated
[VinylControl],show_vinylcontrol
control.
- [Skin]show_stem_controls
Toggle the STEM control section.
- Range:
binary
- Feedback:
STEM control section is shown/hidden.
Nové ve verzi 2.6.0.
Deprecated controls
These controls have been deprecated and may be removed in a future version of Mixxx. In the meantime, skins and controller mappings that still use them will keep working, but using the suggested alternatives is strongly recommended.
- [Master]num_decks
The number of decks currently enabled.
- Range:
integer
- Feedback:
None
Nové ve verzi 1.9.0.
Zastaralé od verze 2.4.0: Use
[App],num_decks
instead.
- [Master]num_samplers
The number of samplers currently enabled.
- Range:
integer
- Feedback:
None
Nové ve verzi 1.9.0.
Zastaralé od verze 2.4.0: Use
[App],num_samplers
instead.
- [Master]num_preview_decks
The number of preview decks currently enabled.
- Range:
integer
- Feedback:
None
Nové ve verzi 1.9.0.
Zastaralé od verze 2.4.0: Use
[App],num_preview_decks
instead.
- [Master]num_microphones
The number of microphone inputs that can be configured.
- Range:
integer
- Feedback:
None
Nové ve verzi 2.2.4.
Zastaralé od verze 2.4.0: Use
[App],num_microphones
instead.
- [Master]num_auxiliaries
The number of auxiliary inputs that can be configured.
- Range:
integer
- Feedback:
None
Nové ve verzi 2.2.4.
Zastaralé od verze 2.4.0: Use
[App],num_auxiliaries
instead.
- [Master]samplerate
The current output sample rate (default: 44100 Hz).
- Range:
absolute value (in Hz)
- Feedback:
None
Zastaralé od verze 2.4.0: Use
[App],samplerate
instead.
- [Master]headVolume
Adjust headphone volume.
- Range:
0.0..1.0..5.0
- Feedback:
Headphone Gain knob
Zastaralé od verze 2.0.0: Use
[Master],headGain
instead.
- [Master]volume
Adjust main volume.
- Range:
0.0..1.0..5.0
- Feedback:
Main Gain knob
Zastaralé od verze 2.0.0: Use
[Master],gain
instead.
- [Master]maximize_library
Toggle maximized view of library.
- Range:
binary
- Feedback:
Toggle maximized view of library
Nové ve verzi 2.0.0.
Zastaralé od verze 2.4.0: Use
[Skin],show_maximized_library
instead.
- [Samplers]show_samplers
- Range:
binary
- Feedback:
Shows Sampler bank(s)
Zastaralé od verze 2.4.0: Use
[Skin],show_samplers
instead.
- [VinylControl]show_vinylcontrol
Toggle the vinyl control section in skins.
- Range:
binary
- Feedback:
Vinyl controls are shown
Nové ve verzi 1.10.0.
Zastaralé od verze 2.4.0: Use
[Skin],show_vinylcontrol
instead.
- [Library]show_coverart
Toggle the Cover Art in Library
- Range:
Binary
Zastaralé od verze 2.4.0: Use
[Skin],show_library_coverart
instead.
- [EffectRack1]show
Show the Effect Rack
- Range:
binary
Zastaralé od verze 2.4.0: Use
[Skin],show_effectrack
instead.
- [ChannelN]hotcue_X_enabled
- [PreviewDeckN]hotcue_X_enabled
- [SamplerN]hotcue_X_enabled
Indicates if hotcue slot X is set, active or empty.
- Range (read-only):
Value
Meaning
0
Hotcue X is not set
1
Hotcue X is set
2
Hotcue X is active (saved loop is enabled or hotcue is previewing)
Nové ve verzi 1.8.0.
Změněno ve verzi 2.4.0: Added support for „active“ state.
Zastaralé od verze 2.4.0: Use
[ChannelN],hotcue_X_status
instead.
- [ChannelN]sync_master
- [PreviewDeckN]sync_master
- [SamplerN]sync_master
Sets deck as leader clock.
- Range:
binary
- Feedback:
If enabled, the Sync button stays lit and tempo slider snap to the appropriate value. Slider adjustments are linked on all decks that have sync lock enabled.
Nové ve verzi 2.0.0.
Změněno ve verzi 2.3.0: This button just enables sync lock mode (similar to
[ChannelN],sync_enabled
), it does not actually guarantee the deck will be the sync leader. This will be fixed in a future version. .. deprecated:: 2.4.0 Use[ChannelN],sync_leader
,[PreviewDeckN],sync_leader
and[SamplerN],sync_leader
instead.
- [ChannelN]beatloop
- [PreviewDeckN]beatloop
- [SamplerN]beatloop
Setup a loop over the set number of beats.
- Range:
positive real number
- Feedback:
A loop is shown over the set number of beats.
Zastaralé od verze 2.1.0: Use
[ChannelN],beatloop_size
and [ChannelN],beatloop_toggle instead.
- [ChannelN]reloop_exit
- [PreviewDeckN]reloop_exit
- [SamplerN]reloop_exit
Toggles the current loop on or off. If the loop is ahead of the current play position, the track will keep playing normally until it reaches the loop.
- Range:
binary
- Feedback:
Loop range in waveform activates or deactivates.
Zastaralé od verze 2.1.0: Use
[ChannelN],reloop_toggle
instead.
- [ChannelN]jog
- [PreviewDeckN]jog
- [SamplerN]jog
Affects relative playback speed and direction for short instances (additive & is automatically reset to 0).
- Range:
-3.0..3.0
- Feedback:
waveform
Zastaralé od verze ??: Use the JavaScript
engine.scratch
functions instead.
- [ChannelN]scratch
- [PreviewDeckN]scratch
- [SamplerN]scratch
Affects playback speed and direction (differently whether currently playing or not) (multiplicative).
- Range:
-3.0..3.0
- Feedback:
Waveform
Zastaralé od verze ??: Use the JavaScript
engine.scratch
functions instead.
- [ChannelN]filter
- [PreviewDeckN]filter
- [SamplerN]filter
Toggles the filter effect.
- Range:
binary
- Feedback:
Filter button
Nové ve verzi 2.0.0.
Zastaralé od verze 2.0.0: Use
[QuickEffectRack1_[ChannelN]_Effect1],enabled
instead.
- [ChannelN]filterDepth
- [PreviewDeckN]filterDepth
- [SamplerN]filterDepth
Adjusts the intensity of the filter effect.
- Range:
default
- Feedback:
Filter depth knob
Nové ve verzi 2.0.0.
Zastaralé od verze 2.0.0: Use
[QuickEffectRack1_[ChannelN]],super1
instead.
- [ChannelN]filterLow
- [PreviewDeckN]filterLow
- [SamplerN]filterLow
Adjusts the gain of the low EQ filter.
- Range:
0.0..1.0..4.0
- Feedback:
Low EQ knob
Zastaralé od verze 2.0.0: Use
[EqualizerRack1_[ChannelN]_Effect1],parameter1
instead.
- [ChannelN]filterLowKill
- [PreviewDeckN]filterLowKill
- [SamplerN]filterLowKill
Holds the gain of the low EQ to -inf while active
- Range:
binary
- Feedback:
Low EQ kill switch
Zastaralé od verze 2.0.0: Use
[EqualizerRack1_[ChannelI]_Effect1],button_parameter1
instead.
- [ChannelN]filterMid
- [PreviewDeckN]filterMid
- [SamplerN]filterMid
Adjusts the gain of the mid EQ filter..
- Range:
0.0..1.0..4.0
- Feedback:
Mid EQ knob
Zastaralé od verze 2.0.0: Use
[EqualizerRack1_[ChannelI]_Effect1],parameter2
instead.
- [ChannelN]filterMidKill
- [PreviewDeckN]filterMidKill
- [SamplerN]filterMidKill
Holds the gain of the mid EQ to -inf while active.
- Range:
binary
- Feedback:
Mid EQ kill switch
Zastaralé od verze 2.0.0: Use
[EqualizerRack1_[ChannelI]_Effect1],button_parameter2
instead.
- [ChannelN]filterHigh
- [PreviewDeckN]filterHigh
- [SamplerN]filterHigh
Adjusts the gain of the high EQ filter.
- Range:
0.0..1.0..4.0
- Feedback:
High EQ knob
Zastaralé od verze 2.0.0: Use
[EqualizerRack1_[ChannelI]_Effect1],parameter3
instead.
- [ChannelN]filterHighKill
- [PreviewDeckN]filterHighKill
- [SamplerN]filterHighKill
Holds the gain of the high EQ to -inf while active.
- Range:
binary
- Feedback:
High EQ kill switch
Zastaralé od verze 2.0.0: Use
[EqualizerRack1_[ChannelI]_Effect1],button_parameter3
instead.
- [ChannelN]beatloop_X
- [PreviewDeckN]beatloop_X
- [SamplerN]beatloop_X
Setup a loop over X beats. A control exists for X = 0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64
- Range:
toggle
- Feedback:
A loop is shown over X beats.
Nové ve verzi 1.10.0.
Zastaralé od verze 2.0.0: Use
[ChannelN],beatloop_X_activate
instead.
- [MicrophoneN]enabled
- [AuxiliaryN]enabled
1 if a channel input is enabled, 0 if not.
- Range:
binary
- Feedback:
Microphone is enabled.
Nové ve verzi 1.10.0.
Zastaralé od verze 2.0.0: Use
[MicrophoneN],input_configured
instead.
- [MicrophoneN]master
- [AuxiliaryN]master
Hold value at 1 to mix channel input into the main output. For
[MicrophoneN]
use[MicrophoneN],talkover
instead. Note that[AuxiliaryN]
also take[AuxiliaryN],orientation
into account.- Range:
binary
- Feedback:
Auxiliary: Play button Microphone: N/A
Zastaralé od verze 2.4.0: Use
[MicrophoneN],talkover
and[AuxiliaryN],main_mix
instead.
- [MicrophoneN]orientation
Nové ve verzi 1.10.0.
Zastaralé od verze 1.10.0: The control is not processed in the Mixer, which is also why there are no orientation controls for Microphones in the GUI.
- [Playlist]LoadSelectedIntoFirstStopped
Loads the currently highlighted song into the first stopped deck
Zastaralé od verze 2.1.0: Use
[Library],GoToItem
instead.
- [Playlist]SelectNextPlaylist
Switches to the next view (Library, Queue, etc.)
Zastaralé od verze 2.1.0: Use
[Library],MoveDown
instead.
- [Playlist]SelectPrevPlaylist
- range:
binary
- feedback:
Library sidebar
Switches to the previous view (Library, Queue, etc.)
Zastaralé od verze 2.1.0: Use
[Library],MoveUp
instead.
- [Playlist]ToggleSelectedSidebarItem
Toggles (expands/collapses) the currently selected sidebar item.
Nové ve verzi 1.11.0.
Zastaralé od verze 2.1.0: Use
[Library],GoToItem
instead.
- [Playlist]SelectNextTrack
Scrolls to the next track in the track table.
Zastaralé od verze 2.1.0: Use
[Library],MoveDown
instead.
- [Playlist]SelectPrevTrack
Scrolls to the previous track in the track table.
Zastaralé od verze 2.1.0: Use
[Library],MoveUp
instead.
- [EffectRack1_EffectUnitN]next_chain
- [EqualizerRack1_[ChannelI]]next_chain
- [QuickEffectRack1_[ChannelI]]next_chain
Cycle to the next EffectChain preset after the currently loaded preset.
Zastaralé od verze 2.4.0: Use
[EffectRack1_EffectUnitN],next_chain_preset
instead.
- [EffectRack1_EffectUnitN]prev_chain
- [EqualizerRack1_[ChannelI]]prev_chain
- [QuickEffectRack1_[ChannelI]]prev_chain
Cycle to the next EffectChain preset after the currently loaded preset.
Zastaralé od verze 2.4.0: Use
[EffectRack1_EffectUnitN],prev_chain_preset
instead.
- [EffectRack1_EffectUnitN]chain_selector
- [EqualizerRack1_[ChannelI]]chain_selector
- [QuickEffectRack1_[ChannelI]]chain_selector
Select EffectChain preset. > 0 goes one forward; < 0 goes one backward.
Zastaralé od verze 2.4.0: Use
[EffectRack1_EffectUnitN],chain_preset_selector
instead.
Removed controls
These controls have been removed from Mixxx. Skins and controller mappings that attempt to use them will not work correctly.
- [ChannelN]flanger
Toggles the flanger effect.
Zastaralé od verze 2.0.0: This control has been removed without a direct replacement. Use the effects framework instead.
- [ChannelN]Hercules1
- [ChannelN]Hercules2
- [ChannelN]Hercules3
- [ChannelN]Hercules4
Zastaralé od verze ??: This control has been removed.
- [ChannelN]NextTask
Zastaralé od verze ??: This control has been removed.
- [ChannelN]NextTrack
Zastaralé od verze ??: This control has been removed.
- [ChannelN]PrevTask
Zastaralé od verze ??: This control has been removed.
- [ChannelN]PrevTrack
Zastaralé od verze ??: This control has been removed.
- [ChannelN]transform
Zastaralé od verze ??: This control has been removed.
- [Flanger]lfoDepth
Adjusts the intensity of the flange effect
Zastaralé od verze 2.0.0: This control has been removed without a direct replacement. Use the effects framework instead.
- [Flanger]lfoDelay
Adjusts the phase delay of the flange effect in microseconds
Zastaralé od verze 2.0.0: This control has been removed without a direct replacement. Use the effects framework instead.
- [Flanger]lfoPeriod
Adjusts the wavelength of the flange effect in microseconds
Zastaralé od verze 2.0.0: This control has been removed without a direct replacement. Use the effects framework instead.
- [EffectRack1]clear
- [EqualizerRack1]clear
- [QuickEffectRack1]clear
Clear the Effect Rack
Zastaralé od verze 2.4.0: This control has been removed without a direct replacement. Use the effects framework instead.