13. Preferències

Mixxx has many options to customize in Options ‣ Preferences.

13.1. Maquinari de so

Preferències de maquinari de so del Mixxx

Preferències de maquinari de so del Mixxx

To achieve the best performance with Mixxx it is essential to configure your audio buffer, sample rate, and audio API. These three factors largely determine Mixxx’s responsiveness and reliability. The optimal settings will vary based on your computer and hardware quality.

For information about the different input and output options, refer to Configuring sound input and output. The Maquinari DJ chapter explains different types of DJ hardware and how to set them up with the input and output options. If you are using a microphone, refer to the Utilitzant micròfons chapter.

13.1.1. Memòria intermèdia d’àudio

La memòria intermèdia d’àudio és la quantitat d’àudio en mil·lisegons que el Mixxx processa al mateix temps. Aquest factor determina la latència entre els canvis als controls del Mixxx com ara en moure el crossfader o prémer el botó de pausa i el que triga a poder-se apreciar aquests canvis a l’àudio. Per exemple, amb una memòria intermèdia de 23 ms, el Mixxx trigarà aproximadament 23 mil·lisegons a reproduir l’àudio una vegada premeu el botó Inicia. La latència actual dependrà de diversos factors.

The audio buffer setting determines how quickly your operating system expects Mixxx to react. A smaller audio buffer means Mixxx will be more responsive, but requires a faster CPU and quality audio interface. Setting your audio buffer too small may be too much for your computer and audio interface to handle. In this situation, Mixxx playback will be choppy and very clearly distorted as your system will not be able to keep up with how frequently Mixxx is trying to process audio. It is recommended to set your audio buffer as small as your system can handle reliably without glitches. Experiment with different audio buffer sizes to find what works for your system.

An audio buffer between 23-64 ms is acceptable if you are using Mixxx with a keyboard/mouse or a controller. An audio buffer below 10 ms is recommended when vinyl control is used because Mixxx will feel unresponsive otherwise.

The Adjusting Audio Latency page on the Mixxx Wiki has tips for different operating systems that may help you use a smaller audio buffer reliably.


Your system may glitch only occasionally if you have your audio buffer set a little too low. This will happen at unpredictable times and you may not notice if you are only doing brief tests of each audio buffer size. When you think you have found a good buffer size for your system, play with Mixxx for at least a half hour before performing to ensure no glitches happen.

13.1.2. Freqüència de mostreig

The sample rate setting in Mixxx controls how many samples (chunks of audio) per second are produced by Mixxx. This determines the maximum frequency in Mixxx’s signal, which is half the sample rate. Humans can only hear up to 20 kHz, so there is generally no need to use more than a 44.1 kHz (44100 Hz) sample rate for playback. Most music is published with a 44100 Hz sample rate, and playing music in a different sample rate than the audio file slightly reduces sound quality.


A sample rate of 96 kHz gives your computer less than half the time to as to do the same processing. Increasing the sample rate will increase CPU usage and likely raise the minimum audio buffer size you can use reliably.

13.1.3. API de so

The Sound API that Mixxx uses is the method by which Mixxx talks to your operating system in order to deliver audio to your audio interface. Your choice of Sound API can drastically affect Mixxx’s performance on your computer. Therefore it is important to take care to choose the best Sound API available to you. Windows

Per a Windows estan disponibles aquestes API de so:

  • ASIO: Bona

  • WDM-KS: Bona

  • WASAPI: Acceptable

  • DirectSound: Dolenta

  • MME: Dolenta

It is best to use the ASIO Sound API that bypassses the sound processing of the Windows kernel. Using ASIO requires a driver for your audio interface from the manufacturer. Check the manufacturer’s website to see if a driver download is available. Soundcards designed for musicians almost always have an ASIO driver available, but audio interfaces built into computers and very cheap audio interfaces typically do not have an ASIO driver. If there is no ASIO driver available for your audio interface, use the WDM-KS API. There is generally no advantage to using ASIO4ALL, a wrapper around the WDM-KS API. GNU/Linux

Per a GNU/Linux estan disponibles aquestes API de so:

  • ALSA: Bona

  • JACK: Bona

  • OSS: Acceptable

ALSA is the simplest sound API to configure. Using ALSA will prevent any other programs from using the audio interface(s) that Mixxx is using.

JACK allows you to route audio between JACK-compatible applications in flexible ways and output sound from multiple programs at the same time. However, JACK can be complicated to set up. Unless you will be connecting Mixxx to other JACK-compatible applications, JACK offers no advantages over ALSA. To use JACK, start the JACK daemon before running Mixxx. Otherwise JACK will not appear as a Sound API in the preferences.

Most modern GNU/Linux distributions use PulseAudio by default. When launched from a GUI menu entry or icon, Mixxx suspends PulseAudio while it is running so that Mixxx can use ALSA directly. Like JACK, PulseAudio allows multiple programs to access one audio interface, but PulseAudio and JACK have opposite design goals. PulseAudio is designed to make ordinary computer usage such as watching videos online and listening to music easy whereas JACK is designed for demanding low latency audio programs like Mixxx. It can be difficult to setup JACK and PulseAudio to work well together. So, unless you already use JACK, it is easiest to let Mixxx suspend PulseAudio and use ALSA.

If the PulseAudio plugin for alsalibs is installed on GNU/Linux, you can choose the virtual device pulse. This allows Mixxx to share the default system audio interface with other media players. This only works if you start Mixxx without pasuspender, which you can do by running mixxx from a console rather than clicking the launcher icon in a menu or on your desktop. Since the sound stream is routed from ALSA to Pulse and back to ALSA, this adds an additional latency of ~2 x the selected audio buffer size.

OSS is an Sound API that predates ALSA. Few modern audio interfaces have OSS drivers. macOS

CoreAudio és l’única API de so disponible per a macOS.

13.1.4. Altres opcions de maquinari de so

  • Multi-Soundcard Synchronization: Mixxx is able to use two or more audio interface at a time, each with its own clock. When multiple audio interfaces are in use, the Mixxx engine is driven by the Master audio interface. Here you can select the synchronization used for the other audio interfaces to avoid buffer overflows or underflows.

  • Keylock/Pitch-Bending Engine: This allows you to select the engine used for independent tempo and pitch changes (e.g. key lock). Use Soundtouch on lower power machines (such as netbooks) or if you experience buffer underflows while using key lock.

  • Master Mix: You may disable the master mix to reduce Mixxx’s CPU usage if you do not use the Master output, recording or live broadcasting.

  • Master Output Mode: In Mono mode, the left and right channel are combined into a mono signal which is passed to both channels of your master audio interface. This is useful for setups where the audience cannot hear your mix in stereo because of speaker placement or playing in a space with lots of reverberation.

  • Buffer Underflow Count: Underflows (data is not available when needed) indicate that some of the subsystems in Mixxx can’t keep up with real-time deadlines imposed by the current audio buffer size. This is useful to tune the latency settings. If the counter increases, then increase your audio buffer size, decrease the sample rate setting or change the sound API setting if available.

13.2. Biblioteca

13.2.1. Canvi de les carpetes de música

Podeu afegir, reenllaçar i elimiliar del Mixxx les carpetes de música des de Preferències ‣ Biblioteca.

Addicció d’una carpeta nova de música

El Mixxx permet utilitzar més d’una carpeta de música per a la Biblioteca. Feu clic a Afegeix per a seleccionar la carpeta on teniu la música. El Mixxx revisarà aquesta carpeta i les seves subcarpetes per si s’afegeixen noves pistes.

If you add a directory that is already in your library, or you are currently rescanning your library, the operation is canceled.

Directories can also be added from the Computer sidebar item inside the library.

Corregiu una carpeta de música existent

If an existing music directory is moved or renamed, Mixxx doesn’t know where to find the audio files in it. The tracks will still show in library but they can’t be loaded on decks and the tracks will become missing after the library is rescanned.

To relink the music directory, go to Preferences ‣ Library, click Relink to select the music directory in its new location. This will re-establish the links to the audio files in the Mixxx library.

Click Library ‣ Rescan Library, this will update the tracks and cause them to show up again in the library, check the location column in the library and you should see that it now points to the new music directory.

The playlists, crates, history and all track data like cue points, rating, comments etc. are preserved after relinking the library, the tracks are also not re-analyzed as the cached analysis is reused. You can confirm this by checking the Key and BPM columns to see if there is a key and BPM for every track.


It is recommended to take a backup of your Mixxx configuration files before moving or renaming music directories used in Mixxx. The location of Mixxx configuration files vary based on the operating system:

  • Windows: %USERPROFILE%\Local Settings\Application Data\Mixxx\

  • macOS: Library/Application Support/Mixxx

  • Linux: The configuration files are found in the .mixxx folder in your home directory.

Supressió d’una carpeta de música

Feu clic a Elimina, i el Mixxx no revisarà més la carpeta i les subcarpetes per trobar noves pistes. Us preguntarà que ha de fer amb les pistes d’aquestes carpetes que estan a la Biblioteca.

  • Seleccioneu Amaga les pistes per amagar totes les pistes d’aquesta carpeta i les subcarpetes.

  • Seleccioneu Esborra les metadades de les pistes per a esborrar les metadades de la Biblioteca del Mixxx permanentment.

  • Seleccioneu Deixa les pistes sense canviar par a mantenir les pistes a la Biblioteca.

Si amagueu les pistes es mantindran les seves metadades en cas que les torneu a afegir més endavant.

Metadades significa tots els detalls de la pista (artista, títol, comptador de reproducció, etc.) així com les graelles de rtime, les marques directes i els bucles. Aquesta acció només afecta a la biblioteca del Mixxx. Els fitxers del disc no es canviaran ni s’esborraran.


Quan canvieu els directoris de música, necessitareu actualitzar les dades de la Biblioteca. Ho podeu pel menú Biblioteca ‣ Torna a escanejar la biblioteca.

13.3. Detecció de ritme

El Mixxx utilitza un detector de BPM i de ritme ultra-precís. No és necessari els ajustaments manuals en la majoria de caos perquè el Mixxx ja sap on es troben els tocs.

La detecció del BPM i de la graella de ritme és una operació complexa. Depenent de l’ordinador, de la taxa de bits de la pista i de la durada, pot tardar una estona. Per defecte el Mixxx analitza la pista completa. Per tal d’accelerar la detecció en ordinadors lents, hi ha la opció “d’anàlisi ràpida”. Si l’activeu, el BPM es calcula analitzant el primer minut de la pista. En general, això no afecta la detecció de la graella perquè la majoria de música de ball actual té la signatura de 4/4 amb un tempo fix.

Prefències del Mixxx - Opcions de BPM

Prefències del Mixxx - Opcions de BPM

La taula següent resumeix les opcions de detecció de ritme



Activa l’anàlisi ràpid

If enabled, BPM will be detected by only using the first minute of audio.

Assumeix un tempo constant

Si l’activeu, el Mixxx assumeix que la distància entre els tocs és constant. Si el desactiveu, s’utilitzarà la graella de ritme tal qual s’ha detectat. Aquest cas és útil per a pistes que tinguin un tempo variable.

Activació de la correcció de desplaçament

Evita que els tocs s’ubiquin incorrectament.

Torna a analitzar el ritme si les preferències canvien o si la informació de ritme és obsoleta.

If enabled, Mixxx over-writes old beat grids from prior versions. Moreover, it will re-analyze the BPM if your beat detection preferences change or BPM data from 3rd party programs are present.

13.3.1. Correcció de les graelles de ritme

Hi ha situacions en les que el BPM i la detecció de ritme no generen una graella de ritme correcta.

Typically, the detected BPM is correct but the analyzer has failed to detect the location of the first beat. Consequently, the beat markers are shifted, i.e. the beat markers are a fixed distance from the true beat. To adjust the beat grid, cue the track before a real beat and click the Beat-grid Adjust button in the Grup de botons d’opcions del plat.

Si el BPM detectat no és precís, la graella de ritme també serà imprecisa. Una desviació de 0,02 BPM pot causar problemes d’alineació en pistes llargues (com en un club mix). Si això passa, la graella semblarà estar ben alineada al començament, però anirà desplaçant-se a mesura que la cançó avança. En general, podeu trobar el BPM fàcilment, seguiu la suggerència següent.


Si el valor de BPM detectat és gairebé un nombre enter, proveu de posar el valor enter manualment al camp de BPM.

13.4. Detecció de clau musical

Mixxx comes with a high precision musical key detector to help you make smooth mixes by ensuring that your tracks are musically compatible.

13.4.1. Configuració de l’analitzador

La detecció de clau musical és una operació complexa. Depenent de l’ordinador, de la taxa de bits de la pista i de la durada, pot tardar una estona. Per defecte el Mixxx analitza la pista completa. Per tal d’accelerar la detecció en ordinadors lents, hi ha la opció “d’anàlisi ràpida”. Si l’activeu, la clau musical es calcula analitzant el primer minut de la pista.

Preferències del Mixxx - Opcions de clau musical

Preferències del Mixxx - Opcions de clau musical

La taula següent resumeix les opcions de detecció de clau musical:



Activa l’anàlisi ràpid

Si l’activeu, la clau es detecta només en el primer minut d’àudio.

Torna a detectar la clau musical si les opcions canvien, o la informació de clau és antiga.

Si l’activeu, el Mixxx torna a analitzar les pistes si heu seleccionat un complement de detecció de clau diferent, o l’anàlisi es va generar amb un altre programa.

Notació musical

Canvia la manera en que es mostren les claus a la Biblioteca.

13.5. Equalitzadors

Preferències d'equalització

Preferències d’equalització

Preferences ‣ Equalizer allows you to setup the equalizers.

  • Equalizer Rack: The Equalizer Rack is a special effect rack that is connected to the deck’s equalizer and filter controls.

    In this section you can select the equalizers and quick effects that are used with the decks.

  • Equalizer Plugin: Here you can select the effect that is used as the mixing EQ in each deck. By default only built-in equalizers are displayed. Unchecking Only allow EQ knobs to control EQ specific effects allows you to select any other effect.

  • Quick Effect: Here you can select the effect that is controlled by the dedicated filter knob in each deck. By default only built-in filter effects are selected for all decks, but that can be changed as above.

  • High/Low Shelf EQ: This slider sets the crossover frequencies of the mixing EQ. It controls which frequency range is affected by the low, mid, and high channel EQ knobs. By default the low knob controls the bass and sub bass range up to 246 Hz. The mid knob controls the mid range up to 2.5 kHz. The remaining treble range is controlled by the high knob.

  • Master EQ: This section allows you to setup an EQ that affects the master output.

13.5.1. Mixing Equalizers

Mixxx offers three types of mixing equalizers with a full kill option. These equalizers are «isolators», adapted from analog crossover networks. Each EQ is combination of a high shelf filter, a band pass filter, and a low shelf filter. Each EQ type has a unique sound, so try them out to find out which one you prefer.

The Bessel EQs with Lipshitz and Vanderkooy Mix (LV-Mix) do not alter the sound or take any processing time when their knobs are in the center position. They activate once you adjust an EQ knob.

The Linkwitz-Riley EQ on the other hand always applies a minimum, natural sounding phase shift to the sound. Their processing time does not change when you adjust the EQ knobs.

The following table compares some technical parameters:




phase shift

bit perfect

CPU usage

Bessel4 LV-Mix


-24 db/Oct



Bessel8 LV-Mix


-48 db/Oct





-48 db/Oct




  • cut: the frequency response (curve form) at the cross over frequency.

  • roll-off: The steepness of the EQ bands.

  • linear phase: No phase distortion, all frequencies are processed with the same group delay.

  • minimum phase: A natural phase distortion, the group delay changes by the frequency.

  • bit perfect: Whether the EQ leaves the original samples untouched when the EQ is at unity.

  • CPU usage: Processing time needed to calculate the EQ output.