Numark DJ2GO2 Touch
The Numark DJ2GO2 Touch is a USB MIDI controller with an integrated audio interface. It is the successor to the DJ2GO2, and features touch capable wheels.
Nouveau dans la version 2.3.1.
Audio Setup
The mapping relies on the following channel assignments:
Output Channels |
Assigned to |
---|---|
1-2 |
Master |
3-4 |
Headphones |
Controller Mapping
Decks
No. |
Control |
Function |
---|---|---|
2 |
HEADPHONES |
Routes deck to headphones output |
6 |
LOAD |
Loads a track into the deck. |
7 |
LEVEL |
Hi / low pass filter effect. |
9 |
PAD MODE |
Switches between modes of operation for pad buttons on both decks. |
10 |
Jog Wheel (top surface) |
Perform scratch operation. |
10 |
Jog Wheel (outer edge) |
Rotate to lower/raise playback speed and pitch. |
11 |
PLAY/PAUSE |
Plays or pause the song. |
12 |
Pads |
4 buttons which can be used to control various features. |
13 |
CUE |
Specifies, plays or recalls temporary cue point. |
14 |
SYNC |
Match tempo and phase of other deck. |
15 |
Tempo slider |
Adjust song playback speed. |
Pads
The pad mode is changed using the PAD MODE button.
Pad Mode |
Function |
---|---|
CUES |
Set cue points, and trigger them by clicking. Clear cue points by clicking while holding the PAD MODE button. |
AUTO |
Enable / disable beat loops, with pads 1, 2, 3, and 4 creating 1, 4, 8, and 16 bar loops respectively. |
MANUAL |
Set a custom loop: pad 1 sets the loop in point, pad 2 sets the loop out point, pad 3 enables / disables the loop, and pad 4 stops the loop and returns to the beginning. |
SAMPLER |
Load / trigger sample tracks. |
Mixer / Library
No. |
Control |
Function |
---|---|---|
3 |
CUE LEVEL |
Adjusts the cue output level. |
4 |
MASTER LEVEL |
Adjusts the master output level. |
5 |
Browse encoder |
Scroll in the track list. Preview tracks when clicking on a track in a tracklist, scrolling the encoder allows seeking the previewed track. Clicking when a track is being previewed will stop the preview, allowing you to scroll the tracklist again. |
8 |
Crossfader |
Fades between left and right deck. |
Inputs / outputs
No. |
IO |
Function |
---|---|---|
1 |
USB |
Micro USB slot for data / power connection to the Mixxx host device. |
16 |
Main (3.5mm) |
Master audio output for the onboard interface. |
17 |
Headphones (3.5mm) |
Headphones audio output for the onboard interface. |