Native Instruments Traktor Kontrol Z1

Native Instruments Traktor Kontrol Z1 is a two-deck ultra-compact DJ controller with an integrated 96 kHz / 24-bit sound card. It features stereo sound output using two unbalanced RCA connectors and a standard headphone (1/8» / 3.5 mm TRS) output jack. The controller can be powered directly from the USB bus or by using an external power adapter.

Compatibility

The Kontrol Z1 is a HID and USB audio class compliant device, which makes it fully compatible with Mixxx. It requires no proprietary drivers when used on Linux or macOS.

For Windows, download and install the latest Traktor Kontrol Z1 audio driver from the manufacturer’s website.

Предупреждение

Parallel installation of Traktor Pro software on Windows

If you have a parallel installation of Traktor Pro on Windows, a service called NIHardwareService.exe is running in the background, which has control over the LEDs of the Z1.

To make the Z1 work properly with Mixxx, you must either uninstall the Traktor Pro software, or temporarily stop this Windows service. One way to do this is to open a Windows PowerShell terminal as Administrator, and run the following command: Stop-Service -Name "NIHardwareService".

Audio hardware setup

The Z1 has a standard 4-channel sound card. Configure the channels in Mixxx as follows:

Audio output

Channel configuration

Main

Channel 1-2

Headphones

Channel 3-4

Controller overview

Native Instruments Traktor Kontrol Z1 (schematic view)

Native Instruments Traktor Kontrol Z1 (schematic view)

Mapping description

All knobs and buttons function in Mixxx as they are labeled and follow the manufacturer’s standard mapping. Two secondary track control functions are also available using the Mode button as a modifier. This makes the Kontrol Z1 more usable by itself without other controllers.

No.

Element

Primary function

Secondary function

1

Main knob

Main output volume (hardware function - not mapped in Mixxx)

2

Cue Vol knob

Headphone output volume (hardware function - not mapped in Mixxx)

3

Cue Mix knob

Adjusts cue / main mix for the headphone output

4

Gain knobs

Adjusts pre-fader gain of the deck

5

Hi knobs

High frequency equalizer knob

6

Mid knobs

Middle frequency equalizer knob

7

Low knobs

Low frequency equalizer knob

8

Filter | FX knobs

Adjusts quick effect superknob for the deck

9

Filter | FX On buttons

Toggles selected deck quick effect on / off

Start / stop track playback

10

Headphone A / B buttons

Toggles deck headphone cueing on / off

Seek track to cue and stop

11

Mode button

Activates secondary functions when held down

12

Level A / B meters

Show the current instantaneous deck volume

13

Volume faders

Adjusts channel volume fader for the corresponding deck

14

Crossfader

Adjusts the crossfader between both decks