Hercules DJControl Inpulse 300
在 2.2.4 版本加入.
Compatibility
This controller is a class compliant USB MIDI and audio device, so it can be used without any special drivers on GNU/Linux, Mac OS X, and Windows. However, if you wish to use the ASIO sound API under Windows, please install the latest driver package available from the Support page.
备注
Firmware upgrade (v1.72) is required for pads to work correctly in FX Mode.
When using Firmware v1.68 and earlier, pads in FX Mode will not work as expected.
For more details about upgrading the Firmware.
Sound card setup
This controller has built-in 4 channel output sound card, with MAIN output (RCA) and HEADPHONE output (3.5mm jack).
Open Preferences > Sound Hardware
Select the Output tab
From the Main drop-down menu, select the audio interface, then Channels 1-2
From the Headphones drop-down menu, select the audio interface, then Channels 3-4
Click Apply to save the changes.
参见
The example setups section provides more details about the audio configuration in Mixxx.
备注
The Master and Headphone knobs, as well as the Master button are hardware controls and interact directly with the integrated sound card’s output. Although they also send MIDI messages, they have NOT been mapped in Mixxx, so do not expect an on-screen reaction when using them. This was done to prevent the knobs to adjust both the gain on the controller’s sound card and in Mixxx.
Mapping description
Decks
Control |
Function |
|---|---|
SYNC button |
Toggle Sync Lock. |
SHIFT + SYNC button |
Set deck as Sync leader. |
CUE button |
Specifies, plays or recalls temporary cue point. |
SHIFT + CUE button |
Return to the beginning of the track. |
Play button |
Play/Pause the current track. |
SHIFT + Play button |
Cue Stutter. |
VINYL button |
Toggle scratch mode (default: on) |
Loop IN button |
Enable Beatloop 4 beats. |
SHIFT + Loop IN button |
Halve the current loop size. |
Loop OUT button |
Disable Beatloop. |
SHIFT + Loop OUT button |
Double the current loop size. |
BEATMATCH GUIDE |
Toggles beatmatch guide LEDs. |
SLIP |
Toggles splip mode. |
Q |
Toggles quantize. |
SHIFT + Q |
Adjusts beatgrid so closest beat is aligned with the current playposition. |
Browser
Control |
Function |
|---|---|
BROWSER encoder (turn) |
Move up/down list. |
SHIFT + BROWSER encoder (turn) |
Move left/right (fold/unfold) list. |
BROWSER encoder (press) |
Switch focus between list and file view. |
SHIFT + Encoder (press) |
Maximize/Minimize library view. |
ASSISTANT button |
Toggle AutoDJ (be sure a playlist was created for AutoDJ before activating this function). |
FX
Control |
Function |
|---|---|
ON pad |
Toggle FX 3 on/off. |
SHIFT + ON pad (select) |
Cycle to the next effect after the currently loaded effect. |
Performance Pads
Hot Cue Mode
Control |
Function |
|---|---|
Pad 1 - 8 |
Set and trigger hotcue 1 - 8 |
SHIFT + Pad 1 - 8 |
Delete hotcue 1 - 8. |
Toneplay Mode
Control |
Function |
|---|---|
Pad 1 |
Jump to the last used hot cue (or cue point if no hotcue is set) and play at original pitch. |
Pad 2 |
Jump to the last used hot cue/cue point and play at +1 semitones. |
Pad 3 |
Jump to the last used hot cue/cue point and play at +2 semitones. |
Pad 4 |
Jump to the last used hot cue/cue point and play at +3 semitones. |
Pad 5 |
Jump to the last used hot cue/cue point and play at -4 semitones. |
Pad 6 |
Jump to the last used hot cue/cue point and play at -3 semitones. |
Pad 7 |
Jump to the last used hot cue/cue point and play at -2 semitones. |
Pad 8 |
Jump to the last used hot cue/cue point and play at -1 semitones. |
SHIFT + Pad 1 |
Change the pitch to the original pitch (without jumping). |
SHIFT + Pad 2 |
Change the pitch to +1 semitones. |
SHIFT + Pad 3 |
Change the pitch to +2 semitones. |
SHIFT + Pad 4 |
Change the pitch to +3 semitones. |
SHIFT + Pad 5 |
Change the pitch to -4 semitones. |
SHIFT + Pad 6 |
Change the pitch to -3 semitones. |
SHIFT + Pad 7 |
Change the pitch to -2 semitones. |
SHIFT + Pad 8 |
Change the pitch to -1 semitones. |
Roll Mode
Control |
Function |
|---|---|
Pad 1 |
Activate Beatloop of 1/8 beat size. |
Pad 2 |
Activate Beatloop of 1/4 beat size. |
Pad 3 |
Activate Beatloop of 1/2 beat size. |
Pad 4 |
Activate Beatloop of 1 beat size. |
Pad 5 |
Activate Beatloop of 2 beat size. |
Pad 6 |
Activate Beatloop of 4 beat size. |
Pad 7 |
Activate Beatloop of 8 beat size. |
Pad 8 |
Activate Beatloop of 16 beat size. |
FX Mode
Control |
Function |
|---|---|
Pad 1 - 3 |
Toggle Effect 1 - 3. |
Pad 5 - 7 |
Cycle to the next effect for Effect 1 - 3. |
Pad 4 |
Toggle Effect Unit 1. |
Pad 8 |
Toggle Effect Unit 2. |
Shift + Pad 1 - 3 |
Toggle Effect 1 - 3. (Effect Unit 3 / 4 for deck A / B) |
Shift + Pad 5 - 7 |
Cycle to the next effect for Effect 1 - 3 (Effect Unit 3 / 4 for deck A / B). |
Shift + Pad 4 |
Toggle Effect Unit 3. |
Shift + Pad 8 |
Toggle Effect Unit 4. |
Sampler Mode
Control |
Function |
|---|---|
Pad 1 - 8 (deck A) |
Trigger Sampler 1 - 8. |
Pad 1 - 8 (deck B) |
Trigger Sampler 9 - 16. |
SHIFT + Pad 1 - 8 (deck A) |
Stop Sampler 1 - 8. |
SHIFT + Pad 1 - 8 (deck B) |
Stop Sampler 9 - 16. |
Beatjump Mode
Control |
Function |
|---|---|
Pad 1 - 2 |
Jump backward/forward by 1 beat. |
Pad 3 - 4 |
Jump backward/forward by 2 beats. |
Pad 5 - 6 |
Jump backward/forward by 4 beats. |
Pad 7 - 8 |
Jump backward/forward by 8 beats. |
Slicer/Slicer Loop Mode
Control |
Function |
|---|---|
Slicer |
Create a slicer section (overrides active loops). Removes the slicer section if one is already active. |
SHIFT + Slicer |
Create a looped slicer section (overrides active loops). Removes the slicer section if one is already active. |
Pad 1 - 8 |
Create a loop on slicer section 1-8. |
Loop IN button |
Enable Beatloop 4 beats (overrides active slicers). |
SHIFT + Loop IN button |
Halve the slicer section size. |
Loop OUT button |
Disable Beatloop or slicer section. |
SHIFT + Loop OUT button |
Double the slicer section size. |
Pressing Slicer or Slicer Loop creates a slicer section (indicated by loop markers). The length of the slicer section is dependent on loop size in the spinbox. Pressing Slicer, Slicer Loop, or Loop Out will remove the slicer section.
The slicer section is cut into 8 equal slices. Pressing pad 1-8 will create a loop on slice 1-8. For example, if a slicer section of 8 beats is created, then each slice will be 1 beat long. Pressing pad 1 will create a 1-beat loop on the 1st slice (1st beat). Pad 2 will loop the 2nd slice, pad 3 will loop the 3rd beat, and so on.
Pressing two pads at the same time creates a loop between two slices. For example, pressing pads 3 and 6 creates a 4 beat loop that encompasses slices 3, 4, 5, and 6. Pressing three or more pads will create a loop between the first and last slices. For example, pressing pads 2, 5, and 7 creates a 6 beat loop that encompasses slices 2-7.
In Slicer mode, the slicer section moves throughout the track. In Slicer Loop mode, the slicer section stays in place.
For more details, look at the original Inpulse 300 manual.
Known issues
The slicer section does not move backwards with the play indicator when scratching with the jogwheel.
Slicer will not work properly if BPM is not constant.
Controls not included in this mapping
Master knob (Hardware control)
Headphone knob (Hardware control)
Master buttons (Hardware control)