Numark Party Mix

Nieuw in versie 2.3.4.

Overview

See the tables below for controls descriptions.

#	Name	Function
1	BROWSE (rotate)	Browse library
1	BROWSE (press+rotate)	switch between Library and Sidebar
1	BROWSE (press)	Equivalent to double clicking the currently selected item in Library (see `GoToItem` control)
2	LOAD 1 and 2	load currently selected track to Deck 1 or 2
3	MASTER GAIN	Adjust the volume level of master output.
4	CUE MIX	Head/mix knob. Adjust the cue/main mix in the headphone output.
5	CUE GAIN	Adjust the headphone volume
10	Crossfader	Controls the mix between the two decks. See Cross-fader

Each of those controls exists in both decks and affects only the corresponding deck.

#	Name	Function
6	GAIN	Adjust the pre-fader, pre-EQ audio level
7	TREBLE	Adjust high frequencies
8	BASS	Adjust low frequencies
9	Channel fader	Adjust volume level
11	CUE	Headphone button. Toggle sending channel to the cue (headphone) channel
12	Jog wheel	If scratch mode is enabled (see the SCRATCH button below): scratch If scratch mode is disabled: pitch bend The behavior of the jog wheel can be fine-tuned, see the Adjustable values section.
13	SCRATCH	Toggle scratch mode. Disabled by default.
14	Pitch fader	Adjust the speed of the track
15	SYNC	If sync lock is disabled: set BPM to the other deck’s BPM If sync lock is enabled: disable sync lock
15	SYNC (hold, then release)	Enable sync lock
16	CUE	If track is playing: stops the track and resets position to the main cue point If playback is stopped: sets the main cue point
16	CUE (hold)	Play the track from main cue point, release to stop playback and return to the main cue point. Playback must be initially stopped on the main cue point.
17	Play/Pause	Play/pause playback
18	PADS 1-4	Pads 1-4 function depends on selected mode
19	PAD MODE	Select mode of PADS 1-4
20	MODE LEDs	The 4 pads in each deck have multiple functions, depending on the selected pad mode. Default pad mode is hotcues. Current mode is selected by pressing PAD MODE. The LED for currently active pad mode is lit up (or all 3 LEDs for effect mode).

Hint

The actual behavior of CUE and Play/Pause buttons depends on Mixxx settings. See Using Cue Modes for more info.

#	Name	Function
18	CUE Mode	set hotcue if not set. If set, go to hotcue position and start playback. Pad lights indicate if a particular hotcue is set or not.
18	LOOP Mode	activate auto-loop. Default auto-loop sizes are: 4, 8, 16, 32. Loop sizes can be adjusted, see the Adjustable values section.
18	SAMPLER Mode	button for 4 Samples for each Deck 1-4 and 5-8 (toggle play from start and stop).
18	EFFECT Mode	Pad 1-3 activates effect during press Deck1 of EffectUnit1, Deck2 of EffectUnit2. Pad 4 switches mix mode. Pad light on indicates Dry/Wet mode. Pad Light off indicates Dry+Wet mode.

There are a few configurable values at the top of the script (Numark-Party-Mix.scripts.js).

Variable	Default value	Description
`jogScratchSensitivity`	340	Scratching sensitivity
`jogScratchAlpha`	1/8	For controlling the alpha-beta filter used in scratching
`jogScratchBeta`	1/8/32	For controlling the alpha-beta filter used in scratching
`jogPitchSensitivity`	10	Jog wheel (pitch bend) sensitivity during play
`jogSearchSensitivity`	1/2	Jog wheel (scrub) sensitivity during pause
`autoLoopSizes`	[ “4”, “8”, “16”, “32”]	Loop sizes for the auto-loop pad mode, each value corresponds to one of the pads.

Hint

See here for more info about constants used in scratching.

I am working on alternative mappings for this controller here: Numark Party Mix Mappings